Circuit Stickers

by Chibitronics

Circuit Stickers are peel-and-stick electronics for crafting circuits. Use them to add electronics to any sticker-friendly surface: paper, fabric, plastic, the sky's the limit!

View all updates May 06, 2014

First units have shipped!

Hello, backers!

We’re excited to announce that we’ve started shipping our starter kits out today! If you ordered only a starter kit, it should be en route to you by the end of the week and you will receive an e-mail notification with a tracking number once your package has shipped. If you ordered anything other than a starter kit, the wait will be slightly longer, as the advanced stickers and kits are still being programmed and assembled, but will soon to be headed your way too, also with a shipping confirmation e-mail and tracking number.

bunnie wrote a great post here sharing some of the challenges and many last-minute successes that it took to produce the kits and get them out to you. It has been an adventure so far and we’re excited to see what you all come up with as Circuit Stickers soon makes it out to the world!

Speaking of sharing, come check out the 21st Century Notebook group where our educator collaborators are sharing what they’ve made with paper circuits along with tips and tricks, projects and activity ideas. A huge thanks to our collaborators at NEXMAP, CV2, the National Writing Project and Educator Innovator for creating this thriving community.

Finally a reminder: we will be at Maker Faire Bay Area May 17th and 18th holding free workshops on making paper circuits with Circuit Stickers. Come say hello and craft circuits with us!

Team Chibitronics


$105,096 raised

of $1 goal

Funded! Order Below

Product Choices

$90

Love to Code - Chibi Chip Starter Kit

The Love to Code Creative Coding Kit is a fun, friendly and new way to engage with coding. Includes the 150-page book printed in full color, a Chibi Chip pre-mounted in a Chibi Clip, a programming cable, 2 rolls of copper tape, 36 white LED stickers, 64 conductive fabric patches, a stencil for sketching component outlines, and a Chibi Book powered ring binder (batteries not included – requires 3 AA batteries).


$34

STEM Starter Kit

Everything you need to get started with circuit stickers: 6 white LED stickers, 2 each of red, yellow, and blue LED stickers, 1 roll of copper tape (5 meters), 2 CR2032 coin cell batteries, 2 small binder clips, 1 copy of the "Circuit Sticker Sketchbook"


$30

RYB LED Mega Pack

A set of 10 each red, yellow, and blue LED stickers.

RYB LEDs

$30

White LED Mega Pack

A set of 30 white LED stickers.

White LEDs

$30

Tropical LED Mega Pack - Limited Edition

A set of 10 each of green, orange, and purple LED stickers (30 total).


$19

Effects add-on

Four effects stickers so you can add blink, fade, twinkle and heartbeat effects to your projects!


$12

Circuit Sticker Sketchbook - English

A copy of the Circuit Sticker Sketchbook in English, perfect for teachers who want to share the Starter Kit with more than one student.


$6

Z-tape add-on

One strip of Z-tape, 2” wide x 5” long.


$8

Copper Tape add-on

One roll of copper tape 5mm (0.2 inch) wide x 5m (16.4 foot) long.


$15

Chibi Clip Accessory

An essential companion to the Chibi Chip, the Clip enables rapid testing and re-use of the Chip. With the Clip, attaching (and detaching) your Chip to circuits built on paper is as easy as using a clothespin.


$12

Conductive Fabric Tape Swatches

Get 64 swatches of conductive fabric tape, pre-cut to 0.2"x0.6" (5mmx15mm) patches for your projects. It's a tiny bridge of durable conductive fabric with a highly conductive adhesive on one side. Use it to patch gaps in copper tape, make T-junctions, build live hinges, or connect to our Love to Code products in a semi-permanent fashion.


$116

Classroom Pack

The Classroom Pack is a class pack for a class size of 30. With 90 circuit stickers (all white, or RYB) and 90 feet of copper tape, educators can conduct several projects per student.

Credits

Chibitronics

Chibitronics is a research collaboration between Jie Qi from the MIT Media Lab and bunnie from Studio Kosagi.


Bunnie

Engineer & Operations

Jie Qi

Designer & Researcher


AQS Inc.

Contract Manufacturer

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: