Remotely power and monitor your computer with Home Assistant
Control your radiant floor heating system with Home Assistant
Next-level home security automation, made simple
A compact IoT dev board with extensive support for a wide range of add-ons
A bipolar, bi-directional, 500 A, 60 V power shunt and battery monitor for Home Assistant
ESP32-based, Home Assistant compatible streaming audio player
A versatile, ESP32-powered, Wi-Fi & BLE-enabled USB-C PD analyzer & power supply
Two fully programmable, open source, no-solder, hot-swappable mechanical keyboards powered by Raspberry Pi & CircuitPython
A quiet, open source, ESP32-based, Wi-Fi-enabled relay that adds Home Assistant compatibility to your AC outlets
A powerful ESP32-based IR/RF remote with sensors and easy integration into Home Assistant
Give your plants what they need with this next-generation, ESP32-based, smart-agriculture IoT kit
Small, programmable, open source input devices with clickable rotary encoders
Open source, ESP32-C3 CAN adapter with USB, Wi-Fi, and BLE support
A fully open source ESP32-based PoE+ board with a mikroBUS™ socket and two handy add-on shields
Open source, battery powered, stand-off acoustic water leak detection
An open hardware Raspberry Pi add-on board with a mini OLED display, buttons, and slots for sensors
A low-power, open source, 2.7-inch IoT display powered by an ESP32-S2 module and featuring SHARP's Memory-in-Pixel (MiP) screen technology
Take control of your home as never before.
Open source smart gardening done easy, with Raspberry Pi
Open source, programmable two-key mechanical keypad with backlighting
Open source, programmable, eight-key keypad with backlighting, underlighting, and OLED screen
The open source smart solder smoke absorber
A complete solution for easy-to-use and affordable wired home automation
An ESP8266-powered, open source, Wi-Fi dev board to control two 5 V or two 12 V LED strips
An ESP8266-powered, open source, Wi-Fi dev board for monitoring air quality and detecting dangerous gases.
An ESP8266-powered, open source, Wi-Fi dev board with temperature and humidity sensors
Make your lights open source and connect your LED strip to the WiFi network with ANAVI Light Controller!