An STM32 LoRa® development platform that's software-compatible with Arm® Mbed™
Open Source All-in-One Instrumentation
Our second annual party for hacking, discovering, and sharing hardware
An Artix-7 FPGA with its own DDR3 RAM - right in your laptop. Convenient for developing PCIe-based designs or using as a super co-processor
A powerful, tiny power monitor shield for your Arduino Nano
An open source stereoscopic camera based on Raspberry Pi
An educational kit for using the ATtiny85 microcontroller to measure and display sensor data
An open, Bee-compatible ESP32 module for quickly and easily adding Wi-Fi and Bluetooth
An accurate and flexible four-channel temperature sensor for instrumenting electronics
An FPGA board that fits inside your USB port
The first open source iCE40 FPGA development board designed for teachers and students
An open source, smart thermostat for controlling HVAC and water systems
A fully open and customizable commercial charging station for electric vehicles.
An ESP8266-powered, open source, Wi-Fi dev board with temperature and humidity sensors
A tiny, open source, plug-and-play Linux dev board with Wi-Fi and lots of storage
An easy-to-use tool for controlling I²C devices
An open-source, all-inclusive, combined device for monitoring and tracking
A Raspberry Pi-powered pocket projector
A powerful, open source FPGA development board for the heart of your next project
Remote Development Device
The open source reconfigurable robot arms for STEM education and fun
Build a fully functional binary clock with your Arduino.
A 100% libre RISC-V + 3D GPU chip for mobile devices
Open Source Biomedical Imaging
A software-defined radio platform with integrated processor for creating self-contained wireless networks
An ESP32-based board with wired Ethernet connectivity and power over Ethernet
Classic NES games on open source hardware that fits in the palm of your hand.
Multi-sensor data acquisition, processing, and Wi-Fi/Bluetooth communication in a single, open source board. Sense anything.
A USB-powered signal generator that can generate RF frequencies from 12.5 MHz to 6.4 GHz
A tiny robot for games, exploration, and programming
ANAVI Play pHAT is a super simple, low cost open source hardware add-on board for Raspberry Pi with buttons for retro gaming and slots for up to 3 I2C sensor modules.
USB-C Power Adapter Programmer and Tester
A high-resolution, Wi-Fi enabled, open source, portable data logger
The high quality, versatile, and reliable USB-UART converter for both professionals and enthusiasts.
A full-featured LiFePO4 battery, power manager, and UPS for the Raspberry Pi