The 2.4 GHz band is a busy place. Your wireless internet operates in this range as well as other electronic devices such as baby monitors, cordless phones, garage door openers, and microwave ovens. Since WiFi can extend the length of a football field, nearby buildings or residences can also cause interference. With WiPry-Pro, you can pinpoint the source of your noise.
All activity across the 2.4 GHz spectrum is visible with WiPry-Pro. Measurement settings include 802.11b, 802.11g, 802.11n and 802.15.4 (ZigBee). SSID-specific activity is also available. Oscium is the only manufacturer to make this available to customers through the Apple App Store. Data is gathered externally and in full compliance with Apple’s Made for iPod program. Visualize your network like never before: on your favorite iOS device! It’s possible to view data in real time or over time using waterfall mode.
Visualize your wireless environment by plugging the WiPry-Pro accessory into your iPhone, iPad or iPod. WiPry-Pro gives you everything you need to eliminate unnecessary interference, and it’s small enough to fit in your pocket. WiPry-Pro is the perfect on-the-go troubleshooting tool for IT professionals and wireless network technicians.
WiPry-Pro comes equipped with a native Lightning connector. It is made for the following Apple products: iPhone 6S Plus, iPhone 6S, iPhone 6 Plus, iPhone 6, iPhone 5C, iPhone 5S, iPhone 5, iPad Pro, iPad mini 4, iPad mini 3, iPad mini 2, iPad mini, iPad Air 2, iPad Air, iPad 4, iPod touch [5th generation].
Upgrade to WiPry-Pro Combo for timing and power measurements. Until recently, making frequency, power, and timing measurements required three separate test equipment setups. With WiPry-Pro Combo, one setup does it all. Directly connect to your RF source using our conducted measurement kit and view transmit on & off times, pulse width and duty cycle. The power meter side of WiPry-Combo is a must-have for the RF enthusiast.
Just like an oscilloscope that measures voltage over time, Oscium’s power meter captures time based events. Analyze signals for pulse width, duty cycle, and settling time. Measure transmission efficiency with peak power and peak-to-average power as well as transmit on and off times. This is extremely powerful for protocol verification and troubleshooting wireless devices. Data is collected at up to 50MSPS allowing you to analyze and verify the smallest protocol level on/off times.
Oscium delivers personal instrumentation that leverages the easy-to-use interface of the iPad, iPhone and iPod. As an app-cessory maker, Oscium designs both an accessory and an app for each tool. Using touchscreen-based technology, Oscium is making cutting-edge test equipment more intuitive and easy to use. Oscium has created a new category in test equipment called iOS Test with the following first-to-market accessory tools: