This page is an archive of the original crowdfunding campaign for this project. It may not be up-to-date with the latest updates and product availability. Return to the current project page.
"This is an upgrade on the PicoEVB, with Xilinx Artix-7, 1 to 8GB DDR3 RAM, and supporting 4 lane PCIe. This is one beefy FPGA board."
"Preparada para proporcionar servicios personalizados como los de encriptación/desencriptación, o aceleración, esta FPGA con RAM para desarrollo en PC puede montarse con o sin disipador de calor."
NiteFury is an Artix-7 FPGA development board in an M.2 form-factor that includes on-board DDR3 RAM. This combination lets you work with PCI Express at incredible rates from inside your laptop or desktop. You can also use NiteFury as an FPGA co-processor. Let Xilinx’s largest Artix-7 handle your encryption or act as a hardware-level encoder/decoder for speedy workflows. It’s your FPGA, design what you like.
NiteFury is designed for seriously fast PCIe design prototyping. But essentially, it’s an FPGA (with RAM) inside your computer. So anything you can do with an FPGA, you can do quickly with NiteFury. Just design for your need in Vivado.
Some fun things you could do:
NiteFury is open source hardware: https://github.com/RHSResearchLLC/NiteFury
The optional, custom-made NiteFury heatsink allows you to work the Artix-7 FPGA even harder before having to worry about heat buildup. It allows for about 8 W of power dissipation to reach a 100°C junction temperature at an ambient temperature of 25°C. It’s also only 5 mm tall by itself. Mounted to the board, the total height is 10 mm. The heatsink is permanently attached to the NiteFury board.
A heatsink is an absolutely necessity when using NiteFury, so you can either use your own or purchase your unit with the heatsink option.
Note: When using the integrated heatsink, make sure you have at least 7.5 mm of clearance above the top of the board. Not all laptops have this much clearance.
|FPGA||Xilinx Artix XC7A200T||Xilinx Artix XC7A50T|
|On-board RAM||512 MB DDR3||None|
|Form Factor||M.2 (NGFF) 2280, keyed for M slot||M.2 (NGFF) 2230, keyed for A and E slots|
|Dimensions||22 x 80 x 5.5 mm (without heatsink)||22 x 30 x 3.8 mm|
|Host Interface||PCIe 4x gen 2||PCIe x1 gen 2|
|External Interface||12 total I/O, 4 selectable analog or digital||No|
Having successfully fulfilled orders for PicoEVB, a very similar product in terms of manufacturing, we’re well positioned and prepared for the next iteration - NiteFury.
Shortly after the crowdfunding goal is met, we’ll place orders for the components with the longest lead time, namely, the FPGA.
Units will be shipped to backers from Crowd Supply, so packages will be sent from Portland, Oregon. Shipping to the United States is included in the price of NiteFury. Delivery outside the US will incur a surcharge during checkout. For more information, please see Crowd Supply’s guide on ordering, paying, and shipping.
NiteFury design is complete and prototype-verified, so most of the risk to the project is that which is inherent in any electronics manufacturing. Components could have unanticipated shortages, leading to longer turn-times. There could be errors in the first production run of PCBs or in assembly. Shipping could take longer than expected, damage could occur, or even a shipping loss. But these potential scenarios all have methods of recovery. And, importantly, we’ll keep backers apprised via project updates should any of them occur.
An open video development board in a PCI express form factor that supports overlaying content on encrypted video signals. Let's bring open video to the digital age!
A small, portable, USB-connected electronics lab-on-a-board that includes an oscilloscope, waveform generator, power supply, logic analyzer, and multimeter.
The Xilinx Artix dev kits that fit in your laptop. A convenient, affordable way to explore Xilinx PCIe IP.