by TinyFPGA

A tiny, low-cost, open FPGA dev board that packs a punch.

View all updates Apr 20, 2018

Campaign Ends and Production Begins

The crowdfunding campaign for the TinyFPGA BX has successfully completed. Thank you to everyone who has backed this project! The level of support was greater than I had imagined it would be and it has been a lot of fun watching the orders come in. If you didn’t get a chance to back the project before the campaign ends, don’t worry, you can still pre-order your board right from the Crowd Supply project page.

Manufacturing Update

About a week before the campaign ended, it was clear how many boards would be needed. Backers have ordered about 450 boards, I ordered a batch run of 1250 boards. This will let me keep the boards in stock for some time. I have contacted the manufacturer, PCBWay, and production has already begun on the TinyFPGA BX bare PCBs, and parts have been ordered for assembly.

PCBWay provides a nice GUI on their website for tracking PCB fabrication process.

The bare PCBs should be completed by April 27th. As of the writing of this update, the boards have finished their inner layer etching. I’ve received a picture from the factory of a large panel containing our boards.

The boards are combined together into large panels so they can be efficiently fabricated. The TinyFPGA BX boards are on the far right of the large panel.

Once the bare PCBs are complete and all of the components have arrived, assembly will begin. Assembly will take about 4 weeks. Assuming all of the components arrive on time and there are no other issues that appear, assembly should complete as early as May 25th. Currently all of the components except for one are scheduled to arrive on time. The FPGAs do not yet have an ETA. I’ll be tracking this closely and updating the schedule as I learn more.

After assembly completes, it will take about a week for the boards to be shipped to my location. They could arrive as early as June 1st. Customs delays and shipping issues can easily push this date out.

Once I have the boards, I’ll be able to test, program, and ship all of the boards for the Crowd Supply campaign. I don’t expect this to complete any earlier than the July 1st ship date from the beginning of the campaign.

If you want the absolute latest information about manufacturing, testing, and shipping, follow the @TinyFPGA Twitter account.

Special Thanks

I have a special thanks to Lattice Semiconductor. Their iCE40LP8K-CM81 FPGA is at the heart of the TinyFPGA BX board and it would be a very different board without that part. Furthermore, Lattice is supporting the project with FPGAs! I am thrilled with the support they have given me and this project. It will go a long way towards developing additional TinyFPGA boards in the future. Thank you!

Thanks again to all of the backers of the project. Without you this project would not be possible. Stay tuned for more updates in the coming weeks.

$44,424 raised

of $1 goal

Funded! Order Below

Product Choices



The TinyFPGA A1 board is a bare-bones breakout board for the Lattice MachXO2-256 FPGA.



The TinyFPGA A2 board is a bare-bones FPGA board in a tiny form-factor. Add more custom digital logic to your next project!


TinyFPGA Programmer

The TinyFPGA Programmer is a very simple USB-JTAG bridge designed to program bitstreams onto TinyFPGA A1 and A2 boards.



Your very own TinyFPGA BX! Learn how to design digital logic, build the tiny microcontroller of your dreams, or just sleep snugly at night knowing you have a digital jack of all trades in your toolkit.


TinyFPGA BX Twins

Two identical TinyFPGA BX boards with a tiny discount! Build something cool with two FPGAs talking to other and learn the tricky nuances of inter-IC communication. Or use one now and save the other for later, its up to you!


TinyFPGA BX Five-pack

A five-pack of TinyFPGA BX boards for all the awesome projects you're going to build. You might not know what you will build yet but you'll be prepared when the fancy strikes.



TinyFPGA is a one-man endeavor to bring the incredible capabilities of FPGAs to makers around the world. Luke started TinyFPGA while looking for an FPGA that could be used in a breadboard. When no suitable candidate was found he took it upon himself to develop a tiny FPGA dev board.

Luke Valenty

OSH Park

Prototype PCB Manufacturer


PCBA Manufacturer

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: