by Amungo Navigation

Four-channel, all-frequency, GNSS RF-to-bits receiver

View all updates Sep 29, 2016

New L1/L2/L5 Antenna design

We’ve made a major update to the L1/L2/L5 Antenna design. First, the RF filter before the first amplifier has been redesigned to reduce loss, which improves the Noise Floor and SNR by 2-3 dB. Second, we’ve been able to reduce the power consumption of internal LNA. This new board has been manufactured, assembled, and checked.

The video above shows the final antenna assembly process. Now it’s ready for testing at its new home on our roof, next to the Trimble Zephyr antenna we use for comparison. Both will be tested together using a NovAtel dual frequency receiver. We’ll publish those results in another update in a week or so.

####RA1L125 — the L1/L2/L5 antenna specifications

  • L1 output frequency range - 1540-1620 MHz
  • L2/L3/L5 output frequency range - 1140-1250 MHz
  • VSWR L1 output: 2
  • VSWR L2/L5 output: 2
  • Antenna gain L1 output: 0 dBi
  • Axial ratio L1 output (above 15° elevation): 6 dB
  • Antenna gain L2/L5 output: -2 dBi
  • Axial ratio L2/L5 output (above 15° elevation): 6 dB
  • Power supply voltage: 4.5 V
  • Power supply current: 120 mA
  • Dimensions (no enclosure, cyl. (diameter x height)): 104 x 30 mm
  • Dimensions (enclosure, cyl. (diameter x height)): 120 x 120 mm
  • Weight (no enclosure): 100 g
  • Weight (with enclosure): 1.5 kg

Thank you for your support thus far. Please share the project with anyone you think would have an interest in the NUT4NT.

Best, Amungo Navigation

$8,464 raised

of $25,000 goal

34% Funded Time Expired
Nov 08 2016


Amungo Navigation

Amungo Navigation creates hardware for geo-location.

Igor Tcarik

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: