snickerdoodle

by krtkl

A palm-sized, reconfigurable Linux computer that connects to the real world: ARM + FPGA + Wi-Fi + Bluetooth + 180 I/O

View all updates Oct 06, 2016

SDSoC has arrived!

snickerdoodlers,

As promised, we have an awesome update to share…

After months of negotiations on behalf of the snickerdoodle community, we’re excited to announce that snickerdoodle black will now ship with a 100% FREE license of SDSoC! For those new to the Xilinx toolchain: SDSoC is Xilinx’s ‘marquee’ Zynq development tool, allowing you to compile and optimize C/C++ code for power and performance on Zynq without having to dive deep into VHDL, Verilog, or other hardware/FPGA languages and constructs. SDSoC is normally $995, so snickerdoodle black customers will be getting a pretty killer perk…

We’d like to say a big “thank you” to Xilinx for helping us make this happen!

If you have any questions, would like to upgrade to snickerdoodle black (a $100 adder), or if you have a snickerdoodle black on order already and want to start exploring the tool ahead of time, shoot us an email at hello@krtkl.com.

We look forward to seeing what you create with snickerdoodle…

Sincerely,

the krtkl crew


$292,984 raised

of $55,000 goal

532% Funded! Order Below

Product Choices

$245

Snickerdoodle Black (Connectors Up)

Dual-Core 866 MHz ARM Cortex-A9 w/1.3M ASIC gates, 180 reconfigurable I/O, 1GB LPDDR2 RAM, 2.4GHz + 5GHz 802.11n 2x2 MIMO Wi-Fi, Bluetooth Classic & BLE, copperHead heat sink, free SDSoC license.


$245

Snickerdoodle Black (Connectors Down)

Dual-Core 866 MHz ARM Cortex-A9 w/1.3M ASIC gates, 180 reconfigurable I/O, 1GB LPDDR2 RAM, 2.4GHz + 5GHz 802.11n 2x2 MIMO Wi-Fi, Bluetooth Classic & BLE, copperHead heat sink, free SDSoC license.


$115

Snickerdoodle One

Dual-Core 667MHz ARM Cortex-A9 w/430K ASIC gates, 155 reconfigurable I/O, 512MB LPDDR2 RAM, 2.4GHz 802.11n Wi-Fi. Only available with connectors up (benchtop).


$49

breakyBreaky breakout board

Full snickerdoodle pinout (270 pins) on 0.1” headers, JTAG connector, DC power jack. Note: order your snickerdoodle connectors "down".


$195

piSmasher SBC

HDMI in AND out, 2x Gigabit Ethernet, 4x USB 2.0 high-speed, audio line in/out, headset, 25 reconfigurable I/O, DC power jack. Note: order your snickerdoodle connectors "down".


$33

12V/36W International Wall Wart

36W/12V wall-mount power supply for use with snickerdoodle baseboards.


$68

cookieJar enclosure

A beautiful enclosure machined out of 6061 aluminum, bead blasted, anodized, and laser engraved. Also serves as heat sink. Note: this enclosure is only compatible with connectors “up” snickerdoodle.


$18

pin housings + jumpers

All seven mating snickerdoodle connectors and a 50-pack of (loose) jumpers - see below for jumper description for benchtop-prototyping; no baseboard needed.


$33

jumpers (150 pack)

7.5" (19cm) long with Samtec pins on one end (for installing into pin housings, above) and 0.1" female “maker” pins/housings on the other. Note: includes jumpers (150 pack) only.


$33

32GB microSD card (pre-loaded)

32GB U3 Speed Class microSD card pre-loaded with snickerdoodle Ubuntu Linux.


$73

ten sets of baseboard headers

Ten sets of all seven connectors needed for building your own snickerdoodle baseboard; mates with snickerdoodle connectors “down”.

Credits

krtkl


Ryan Cousins

Jamil Weatherbee

Russell Bush


Aligni

Product Lifecycle Management (PLM) Software

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: