Haasoscope

← View All Updates
Mar 20, 2018

The Final Stretch!

200 boards were ordered on February 16th, and I should receive them on April 3rd. After a few final touches, I’ll be sending them, along with all the accessories, to Crowd Supply, and then they’ll be sending them to you! The updated “shipping date” is about April 13th. I think I originally aimed for February 1, so I’m (only) 2 months late. I apologize for the delays!

While you’re waiting, have a look at the “documentation” I wrote.

It also points to the GitHub repository with all the code, firmware, and hardware files.

Enjoy!

$18,733 raised

of $10,000 goal

Funded! Order Now

Dec 14 2017

funded on

187%

funded

268

pledges

Product Choices

$119

Your very own Haasoscope!

A fully assembled Haasoscope, preloaded with firmware and ready for data-taking! You also might want to grab a USB-serial adapter (for interfacing to a computer) and/or a USB-blaster (for reprogramming the firmware).


$9

USB-blaster

This lets you reprogram the Haasoscope FPGA firmware from either Windows or Linux using the free Altera Quartus II software via the JTAG connector.


$9

A Cool Screen!

This is a 0.96" 128X64 pixel white OLED screen. It communicates with the Haasoscope over an SPI interface, and can show ADC data from a selected channel, or whatever you tell it to! It can plug directly into the header above the FPGA.


$16

Oscilloscope Probes

Two passive 100 MHz bandwidth oscilloscope probes for connecting to Haasoscope 100 MHz ADC inputs using BNC.


$15

High-speed USB Readout Board

In case 1.5 Mb/s is not enough bandwidth for you, grab one of these boards and have high-speed USB2 output from a Haasoscope! Using just 8+2 digital outputs on the Haasoscope, you can get about 4 MB/s, about 20x faster than serial, and still use the same python readout code. It's supported in the stock firmware too! Using 8+4 digital outputs, you could in theory even get up to 40 MB/s using C++ readout code and the free FTDI USB libraries.

Ask a Question

Have a question not answered in the description above or in the Updates?

Ask Andy Haas a Question or Browse the Crowd Supply Guide

Credits

Andy Haas

I teach physics at NYU. I use electronics for research, in teaching, and as a hobby.


Andrew Haas


Seeed Studio

PCBA Manufacturer

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: