A 4G LTE and Wi-Fi connected Linux dev board with GNSS global positioning
A handheld RFID & NFC test instrument optimized for untethered use in the field
An open source, smart thermostat for controlling HVAC and water systems
Four-channel, all-frequency, GNSS RF-to-bits receiver for precision, satellite-based positioning
A Configurable, Affordable System-on-Chip for Analysis and Demonstration of Election Security
A 70 MHz - 6 GHz SDR receiver in a USB stick
An STM32 LoRa® development platform that's software-compatible with Arm® Mbed™
An Artix-7 FPGA with its own DDR3 RAM right in your laptop - for developing PCIe, etc.
Control any stepper motor using Wi-Fi
An open, Bee-compatible ESP32 module for quickly and easily adding Wi-Fi and Bluetooth
An FPGA board that fits inside your USB port
The first open source iCE40 FPGA development board designed for teachers and students
An open-source, all-inclusive, combined device for monitoring and tracking
A 100% libre RISC-V + 3D GPU chip for mobile devices
A software-defined radio platform with integrated processor for creating self-contained wireless networks
Neural network accelerator for AI on the edge. Up to four trillion ops/sec with just a few watts.
The finger-tip sized ARM Cortex-M4F module with BT 5, BT Mesh, and 30 I/O
An ESP32-based board with wired Ethernet connectivity and power over Ethernet
BadUSB embedded into a USB cable
Multi-sensor data acquisition, processing, and Wi-Fi/Bluetooth communication in a single, open source board. Sense anything.
The Re:Load Pro is an active load. It acts as a current sink, always drawing the same amount of current regardless of the voltage across it.
ANAVI Play pHAT is a super simple, low cost open source hardware add-on board for Raspberry Pi with buttons for retro gaming and slots for up to 3 I2C sensor modules.
A software agnostic four-axis motion controller with independently configurable integrated motor drivers
Open source USB LoRa® device. Get connected and take advantage of the growing IoT network.
An open source Wi-Fi connected IoT button
This board is purpose-built to expand the capabilities of the HiFive Unleashed board and comes pre-programmed with a PCIe Root Port in the PolarFire FPGA and much more. Make a RISC-V PC!
A low-power, low-cost, wireless wearable built with chip-stacking technology.
Open hardware USB true random number generator
The world’s first RISC-V-based, Linux-capable development board
An ARM board that fits inside your USB connector
An open, affordable, compact USB/eSATA-to-Cloud adapter
An open source, parallel printing accessory that is fully compatible with LulzBot® TAZ 3D printers
A low-cost, low-power NAS for 3.5" drives
An open source, modular, FPGA-based development kit that makes embedded vision design easy and affordable.
The Xilinx Artix dev kits that fit in your laptop. A convenient, affordable way to explore Xilinx PCIe IP.