Novena

← View All Updates

May

18

Final Push!

Dear Backers,

We are simply overwhelmed with the support our campaign has received in the last 48 hours. We’re currently over $560k, and all the stretch goals have been well met. We’ve got nothing left to say but thank you for the amazing job everyone has done to help get the word out.

There’s now just 14 hours left in the campaign, and that means there is just 14 hours left for your friends and colleagues to benefit from the campaign stretch goal awards that you helped all of us achieve - the General-Purpose Breakout Board and ROMulator for board-level and up, and the MyriadRF software defined radio bundle for system-level (all-in-one desktop, laptop, or heirloom) backers. And, of course, everyone, regardless of when they order, will benefit from the 2D/3D graphics drivers that served as our first stretch goal.

Thanks, and we’re really looking forward to building your Novena hardware!

bunnie & xobs

$783,382 raised

of $250,000 goal

Funded! Order Now

May 18 2014

funded on

313%

funded

1,114

pledges

Product Choices

$550

Just the Board

For crafty people who want to build their case and define their own style, we'll deliver to you the main PCBA, stuffed with 4GiB of RAM, 4GiB microSD card, and an Ath9k-based PCIe wifi card. Boots to a Debian desktop over HDMI.


$425

Hacker Case Kit

The barebones hacker case kit! It'll give you the structure on which to build your custom Novena set-up using your main board. Grab some mounting screws from the hardware store, and you're ready to go.


$35

General Purpose Breakout Board (GPBB)

Breaking out all the goodies, this 40 pin header allows you easy access to the Novena Spartan-6 FPGA. The GPBB buffers 16 FPGA outputs and 8 FPGA inputs to be compatible with either 3.3V or 5V, gang-selectable via software. It also provides six 10-bit analog inputs (up to 200ksps sample rate) and two 10bit analog outputs (~100ksps max rate), all broken out to an easy-to-use 40-pin male 0.1” dual-row header. The board was created as a stretch goal in the original Novena crowdfunding campaign.


$110

Battery

Overstock of the custom-manufactured batteries for the campaign - these are 5000mAh 3-cell lithium battery packs that fit especially well into the Novena desktop or laptop case. *International shipping not available for this item.


$16

Battery Holder

A holder for the standard Novena battery pack mentioned above. Holds the battery nicely in the Peek array of the injection-molded case. Has a 4mm bullet connector.


$58

eDP Adapter Board

This adapter board is a bridge between the LVDS port on the main board and the eDP connection for the LCD screen. It has hole placements to be secured directly over the main board using the appropriately sized M2 screws. See here for more details.


$90

LCD Screen

This is the same screen as that used in the desktop and laptop Novena configurations. It is a 13.3" amorphous silicon TFT active matrix IPS LCD at 1920 x 1080, 166 ppi, 350 cd/m2 luminance at max brightness, 700:1 contrast ratio (typical), 14ms TR, 11ms Tf (typical) response time, and a wide viewing angle of approximately 89 degrees vertically or horizontally in any direction.


$50

AC Adapter

AC power supply for Novena configurations, with a US plug. 100-240V input at 50/60Hz and 1.5A. 18V output at 3.47A. Branded with the Novena logo!


$4

Cable Clips (Set of 3)

Helping you keep your project tidy, these cable ties screw (M2.5 screws with washers - not included) into the Novena case "Peek Array". Domestic shipping included.

Credits

Sutajio Kosagi

Sutajio Ko-usagi supports and produces open hardware products designed by bunnie and xobs.


bunnie

Hardware

Sean Cross

Software


Mottweiler Studio

Heirloom laptop design and fabrication

AQS Inc.

Contract Manufacturer

Monstro

Video Editing

Subscribe to receive the Crowd Supply weekly newsletter, highlighting the latest creators and projects: