snickerdoodle

by krtkl

A palm-sized, reconfigurable Linux computer that connects to the real world: ARM + FPGA + Wi-Fi + Bluetooth + 180 I/O

View all updates Oct 27, 2015

This Week in snickerdoodle (in 60 seconds)

snickerdoodlers,

Here’s what’s going on this week:

If you have an hour to be really entertained/kill, Ryan is live on FLOSS Weekly RIGHT NOW!! If you’re busy, no problem (you can catch the recording later).

Important update regarding this week’s Google Hangout

We moved this event to a Google Hangout on Air (new URL). This will allow us to field questions ahead of time so please send any questions you’ve been itching to ask to hangout@krtkl.com or click here. The question submission period is open for the next 48 hours and the best question wins a prize!

*Note: This is a live broadcast and a special deal will be announced in the first few minutes so be sure to tune in! And tell your friends…*

Finally, we recently started a Thunderclap to help get the word out about snickerdoodle. Just takes a few seconds and a couple clicks and it would be a huge help to make the project a success!

That’s it for now. Be sure to check out our latest baseboard giggleBits and stay tuned for more updates.

85% and counting…you can almost smell it now!

Best regards,

Cousins, Weatherbee, and Bush

krtkl inc.
Like us on Facebook
Follow us on Twitter


$348,940 raised

of $55,000 goal

634% Funded! Order Below

Product Choices

$245

Snickerdoodle Black (Connectors Up)

Dual-Core 866 MHz ARM Cortex-A9 w/1.3M ASIC gates, 180 reconfigurable I/O, 1GB LPDDR2 RAM, 2.4GHz + 5GHz 802.11n 2x2 MIMO Wi-Fi, Bluetooth Classic & BLE, copperHead heat sink, free SDSoC license.


$49

breakyBreaky breakout board

Full snickerdoodle pinout (270 pins) on 0.1” headers, JTAG connector, DC power jack. Note: order your snickerdoodle connectors "down".


$245

piSmasher SBC

HDMI in AND out, 2x Gigabit Ethernet, 4x USB 2.0 high-speed, audio line in/out, headset, 25 reconfigurable I/O, DC power jack. Note: order your snickerdoodle connectors "down".


$33

12V/36W International Wall Wart

36W/12V wall-mount power supply for use with snickerdoodle baseboards.


$18

pin housings + jumpers

All seven mating snickerdoodle connectors and a 50-pack of (loose) jumpers - see below for jumper description for benchtop-prototyping; no baseboard needed.


$68

cookieJar enclosure

A beautiful enclosure machined out of 6061 aluminum, bead blasted, anodized, and laser engraved. Also serves as heat sink. Note: this enclosure is only compatible with connectors “up” snickerdoodle.


$33

32GB microSD card (pre-loaded)

32GB U3 Speed Class microSD card pre-loaded with snickerdoodle Ubuntu Linux.


$9

baseboard headers

All seven connectors needed for building your own snickerdoodle baseboard; mates with snickerdoodle connectors “down”.


$73

ten sets of baseboard headers

Ten sets of all seven connectors needed for building your own snickerdoodle baseboard; mates with snickerdoodle connectors “down”.

Credits

krtkl

We’re a collection of electrical, mechanical, and software engineers based out of San Francisco. With decades of experience in embedded systems, real-time controls, and robotics, we’ve worked on everything from medical devices to consumer electronics. With the mindset that no detail is too fine and “good enough” never is, we live for building products people love and that will make a difference in the world.


Ryan Cousins

Jamil Weatherbee

Russell Bush


Aligni

Product Lifecycle Management (PLM) Software

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: