snickerdoodle

← View All Updates
Oct 29, 2015

snickerdoodle Hangout, FLOSS, Thunderclap...95%!!

snickerdoodlers,

As a friendly reminder, our live Hangout is about to start! Thanks to those of you who submitted questions ahead of time; you’ll also be able to submit questions during the event and we’ll answer as many as time permits. The event will be recorded and available on our YouTube channel later today, but as a “thank you” for tuning in live, you’ll have access to an awesome deal that will be announced in the first few minutes of the event and will only be valid while we’re on the air, so be sure to join us if you can!

In case you missed it, Ryan was on FLOSS Weekly with David Scheltema from Make Magazine on Tuesday.

And don’t forget to help get the word out about snickerdoodle by supporting our Thunderclap!

95%…drum roll please!

Best regards,

Cousins, Weatherbee, and Bush

krtkl inc.
Like us on Facebook
Follow us on Twitter

$270,810 raised

of $55,000 goal

Funded! Order Now

Nov 21 2015

funded on

492%

funded

4,082

pledges

Product Choices

$5

Support Us!


$195

snickerdoodle black

Dual-Core 866 MHz ARM Cortex-A9 w/1.3M ASIC gates, 180 reconfigurable I/O, 1GB LPDDR2 RAM, 2.4GHz + 5GHz 802.11n 2x2 MIMO Wi-Fi, Bluetooth Classic & BLE, copperHead heat sink, free SDSoC license.


$45

breakyBreaky breakout board

Full snickerdoodle pinout (270 pins) on 0.1” headers, JTAG connector, DC power jack. Note: order your snickerdoodle connectors "down".


$33

12V/36W International Wall Wart

36W/12V wall-mount power supply for use with snickerdoodle baseboards.


$68

cookieJar enclosure

A beautiful enclosure machined out of 6061 aluminum, bead blasted, anodized, and laser engraved. Also serves as heat sink. Note: this enclosure is only compatible with connectors “up” snickerdoodle.


$18

pin housings + jumpers

All seven mating snickerdoodle connectors and a 50-pack of (loose) jumpers - see below for jumper description for benchtop-prototyping; no baseboard needed.


$33

jumpers (150 pack)

7.5" (19cm) long with Samtec pins on one end (for installing into pin housings, above) and 0.1" female “maker” pins/housings on the other. Note: includes jumpers (150 pack) only.


$33

32GB microSD card (pre-loaded)

32GB U3 Speed Class microSD card pre-loaded with snickerdoodle Ubuntu Linux.


$73

ten sets of baseboard headers

Ten sets of all seven connectors needed for building your own snickerdoodle baseboard; mates with snickerdoodle connectors “down”.

Ask a Question

Have a question not answered in the description above or in the Updates?

Ask krtkl a Question or Browse the Crowd Supply Guide

Credits

krtkl


Ryan Cousins

Jamil Weatherbee

Russell Bush


Aligni

Product Lifecycle Management (PLM) Software

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: