snickerdoodle

← View All Updates
Jul 26, 2018

piSmasher reminder, snickerdoodle update

snickerdoodlers, 

A reminder for all those with outstanding piSmasher orders: If you have not done so already, you MUST fill out the online form linked in the last update…and linked again here. And here: https://goo.gl/forms/D3zamFIJuQRsHlrf1

If you don’t complete this form, we cannot ship (or refund) your order. Note: Fulfillment priority will go to those who completed the form in accordance with the original deadline (July 31). Any orders associated with submissions after this date will be fulfilled in the next production run. Also, there is a comment section at the end of the form for any “special requests” (or compliments/insults).

For those who have already completed the form: Thank you! And rest assured, your responses have been recorded and forwarded to Crowd Supply for processing. It will likely take a few weeks for them to process everyone’s requests (as there are several hundred), but it will be done. 

As far as progress goes, production is humming along. The PCBs are due to arrive in the next 48 hours with assembly to commence shortly thereafter (as soon as the CM completes the kit audit and can get the job on the line). 

Also, in snickerdoodle news…another shipment of ~200 boards just landed at Crowd Supply and we’ve started the next batch of snickerdoodle blacks. Combined, this will represent the LAST of the preordered snickerdoodles – we made it!!! These are likely still several weeks from shipping, but the light at the end of the tunnel is starting to get a lot brighter. 

Finally, if you haven’t already, please check out our new website and let us know what you think: krtkl.com

All snickerdoodle resources have been moved over (including the forum, which is now “live” again). Thanks for bearing with us during this transition. Hopefully everyone finds the new site to be a much more valuable resource. 

That’s it for now. Any questions or immediate needs, please email us at orders@krtkl.com and we’ll get back to you as quickly as we can. 

Keep on doodling,

the krtkl crew

$280,685 raised

of $55,000 goal

Funded! Order Now

Nov 21 2015

funded on

510%

funded

4,018

pledges

Product Choices

$5

Support Us!


$95

snickerdoodle one

Dual-Core 667MHz ARM Cortex-A9 w/430K ASIC gates, 155 reconfigurable I/O, 512MB LPDDR2 RAM, 2.4GHz 802.11n Wi-Fi. Only available with connectors up (benchtop).


$195

snickerdoodle black

Dual-Core 866 MHz ARM Cortex-A9 w/1.3M ASIC gates, 180 reconfigurable I/O, 1GB LPDDR2 RAM, 2.4GHz + 5GHz 802.11n 2x2 MIMO Wi-Fi, Bluetooth Classic & BLE, copperHead heat sink, free SDSoC license.


$45

breakyBreaky breakout board

Full snickerdoodle pinout (270 pins) on 0.1” headers, JTAG connector, DC power jack. Note: order your snickerdoodle connectors "down".


$195

piSmasher SBC

HDMI in AND out, 2x Gigabit Ethernet, 4x USB 2.0 high-speed, audio line in/out, headset, 25 reconfigurable I/O, DC power jack. Note: order your snickerdoodle connectors "down".


$33

12V/36W International Wall Wart

36W/12V wall-mount power supply for use with snickerdoodle baseboards.


$68

cookieJar enclosure

A beautiful enclosure machined out of 6061 aluminum, bead blasted, anodized, and laser engraved. Also serves as heat sink. Note: this enclosure is only compatible with connectors “up” snickerdoodle.


$18

pin housings + jumpers

All seven mating snickerdoodle connectors and a 50-pack of (loose) jumpers - see below for jumper description for benchtop-prototyping; no baseboard needed.


$33

jumpers (150 pack)

7.5" (19cm) long with Samtec pins on one end (for installing into pin housings, above) and 0.1" female “maker” pins/housings on the other. Note: includes jumpers (150 pack) only.


$33

32GB microSD card (pre-loaded)

32GB U3 Speed Class microSD card pre-loaded with snickerdoodle Ubuntu Linux.


$73

ten sets of baseboard headers

Ten sets of all seven connectors needed for building your own snickerdoodle baseboard; mates with snickerdoodle connectors “down”.

Ask a Question

Have a question not answered in the description above or in the Updates?

Ask krtkl a Question or Browse the Crowd Supply Guide

Credits

krtkl


Ryan Cousins

Jamil Weatherbee

Russell Bush


Aligni

Product Lifecycle Management (PLM) Software

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: