Dear Backers,

We are pleased to announce a significant advancement in our Kryptor FPGA project. Despite recent challenges in the FPGA market, we are excited to share our recent developments with you.

Resuming Production with the MAX10 FPGA Chip

Our team has now successfully secured the critical MAX10 FPGA chip, marking a pivotal milestone that allows us to resume our production. This firmly positions us on the path toward the next phases of our project. With the FPGA chips now in our possession, our next goal is to complete the assembly of all boards before the end of 2023.

Testing and Compliance

Post-assembly, we will embark on the following steps to ensure top-notch quality and performance for our backers:

• Individual Board Testing: Each board will be tested with a basic configuration to verify its functionality.

• JTAG Programmer Testing: We will test the JTAG programmers to ensure they are fully functional for programming and configuration.

• CE EM Lab Tests for Compliance: The boards will undergo CE EM lab tests for the CE marking, confirming compliance with European standards.

• Packaging and Shipping: The final phase involves packaging the units and shipping them to Crowd Supply in the USA, who will then distribute them to all our backers. We estimate final delivery in April 2024.

Ongoing Progress

We want to thank you again for your support and patience. We remain committed to keeping you updated and engaged as we progress through each of these pivotal steps.

If you have any questions or concerns, please reach out to our support team. Also,we welcome you to join us on our Telegram group or Twitter account @SkudoTech, to engage with us directly.

Best regards,
Skudo Team