StereoPi v2

by StereoPi

The open-source stereoscopic camera based on Raspberry Pi with Wi-Fi, Bluetooth, and an advanced powering system

View all updates Feb 24, 2021

Crowdfunding Has Begun!

by Eugene Pomazov

We are glad to announce that our StereoPi v2 campaign is live!

In this next generation of the StereoPi, we took into account a lot of requests from our customers. That’s why we added a lot of new features, and dramatically reviewed our kits content. Now you can assemble a ready-to-use stereoscopic camera with the Camera Kit. If you want to get the highest quality from the couple of HQ cameras - our metal HQ housing is here! The Camera Kit now includes both OpenCV and SLP Raspberry OS microSD cards, so you can start your experiments right after unpacking. We also have the new Compute Module 4 onboard, Wi-Fi, Bluetooth, and… we have too many to say!

Just take a look at the full list of features on our campaign page!

About the Author

Eugene Pomazov

StereoPi  ·  Realizator  ·   St. Petersburg


$78,032 raised

of $35,000 goal

222% Funded! Order Below

Product Choices

$49

StereoPi v2 Slim

Perfect for DIY ninjas and those wanting to embed StereoPi in a tight space. This board is the same as the standard edition, but without all the bulky connectors - the Ethernet RJ45 jack, GPIO header, and dual USB Type-A connector have not been populated. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables and three jumpers already included.


$55

StereoPi v2 Standard

The world of stereoscopic video awaits! This board is the ultimate interface between two cameras and a Raspberry Pi Compute Module. It comes with all the bells and whistles, including Ethernet, dual USB ports, GPIO header, microSD slot, HDMI output, and more. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables and three jumpers already included.


$185

StereoPi v2 Camera Kit

Everything you need to assemble your camera! Includes StereoPi Standard, CM4 + external antenna, 2 cameras (IMX219, 160 FOV), a TFT screen, a shot button, camera-mount plates, nuts & bolts, 3 jumpers, a 15 cm tripod, and 2 microSD cards with pre-written SLP and OpenCV images!


$25

StereoPi PoE HAT

This board adds Power over Ethernet option to your StereoPi


$55

StereoPi HQ Metal Housing

Metal housing for a couple of HQ cameras with advanced adjustments features. Includes StereoPi HQ housing base + carriages, 2 x HOYA CM500 filters (8.9 x 8.9 x 1 mm), a set of nuts/bolts/washers for assembly, and a tripod. To use this kit you need a couple of HQ cameras and a couple of C or CS lenses.

Credits

StereoPi

We are a small team of geeks who have been making remote-controlled things with livestreaming video since 2010. We've done everything from boats and planes, to robots, copters, and VR helmets. If we can't find the right tools for our projects, we build them ourselves.


Eugene

Sergey Serov


NexPCB

Recommended

Full-service Manufacturer

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: