by StereoPi

An open source stereoscopic camera based on Raspberry Pi

View all updates Apr 18, 2019

First Batch is at Crowd Supply

by Eugene Pomazov

First shipment

Crowd Supply has received the first shipment of StereoPi boards for fulfillment! The rest from this batch are expected to arrive next week.

Now is the time to check your shipping address in your Crowd Supply account and update it if necessary.

Well, let’s open the box:

Who’s there?

There are lot of StereoPi inside!

Top view…

…and the bottom…

…and the front view

MicroSD with S.L.P. Raspbian image

Short camera ribbons

Family photo

Both boxes: StereoPi and accessories

Almost sold out

Also, we’d like to state that almost all boards from the first batch are already sold. At this moment only a few boards from this run are available for order and those are on Crowd Supply. If you planned to get a StereoPi from the current batch, now is the time to do it.

No need to worry about availability going forward, though - plans for the second batch are already in play. At this time, we estimate that the next batch will arrive at the end of June. We’ll let you know when those plans are finalized.

About the Author

Eugene Pomazov

StereoPi  ·  Realizator  ·   St. Petersburg

$164,339 raised

of $35,000 goal

469% Funded! Order Below

Product Choices


StereoPi AnyCase Kit

With AnyCase Kit you can get your setup in a 10 minutes, before you go to your 3D printer or laser cut machine! You can assemble any case with 25, 65, 120 or 200 mm stereobase, or for 360 degree video with just a screwdriver! And you have 12 more camera ribbons now, do not afraid to bend you cables in your bold experiments!


StereoPi Slim Edition

Perfect for DIY ninjas and those wanting to embed StereoPi in a tight space. This board is the same as the standard edition, but without all the bulky connectors - the Ethernet RJ45 jack, GPIO header, and dual USB Type-A connector have not been populated. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables already included.


StereoPi Starter Kit

This kit has everything you need to get started right away. The kit includes one StereoPi Standard Edition board, two V1 cameras (w/ ~20 cm ribbon cables), one Raspberry Pi Compute Module 3 + Lite, and everything in the StereoPi Accessories Kit (two short ribbon cables, one USB power cable, two power cables, one V1/V2 dual-camera mounting plate, and one wide-angle dual-camera mounting plate). We've also included a microSD card pre-imaged with Raspbian and all the stereoscopic video and image demos you see on this project page.


StereoPi Deluxe Kit

This kit includes everything in the StereoPi Starter Kit and adds two wide-angle (160°) cameras (w/ ~20 cm ribbon cables). With this kit, you'll be able to run all of the demos shown on this project page and start experimenting on your own. You will reign supreme over your stereoscopic domain.



We are a small team of geeks who have been making remote-controlled things with livestreaming video since 2010. We've done everything from boats and planes, to robots, copters, and VR helmets. If we can't find the right tools for our projects, we build them ourselves.


Sergey Serov

Kirill Shiryaev



Full-service Manufacturer

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: