StereoPi

by virt2real

An open source stereoscopic camera based on Raspberry Pi

View all updates Jul 08, 2019

Second batch status, CM3+ here again, and 3 new video tutorials

Second batch status

We can now confirm that our second production batch is in the works. This week, the first part of this batch will be shipped from our factory to the USA, and we expect that next week, Crowd Supply will receive units on it’s stock and be able to start shipping to backers shortly afterwards. The second, bigger part of this batch will arrive at the end of July. We hope that this batch will last us a bit longer and solve the “backorder” problem…

CM3+ Lite available again!

Raspberry Pi Compute Module 3 +

Thanks to the Raspberry Pi Foundation and our supply partners, we were able to find the newest CM3+ Lite modules in a quantities we need. This means that all orders of Starter and Deluxe kits will actually be shipped with CM3+ modules instead of declared CM3.

Better late than never. Basic video guides are here!

We recorded 3 video guides with a detailed “first start” explanation. How to insert Compute Module, why camera ribbon connectors felt in love with GPIO pins, and what you will see on your HDMI screen with the first boot of our S.L.P. or OpenCV Raspbian images.

Building and booting StereoPi with the Raspbian SLP image, plus bonus

Building and booting StereoPi with the Raspbian OpenCV image

Flashing RPi Compute Module’s eMMC via StereoPi


$102,644 raised

of $35,000 goal

293% Funded! Order Below

Product Choices

$69

StereoPi Slim Edition

Perfect for DIY ninjas and those wanting to embed StereoPi in a tight space. This board is the same as the standard edition, but without all the bulky connectors - the Ethernet RJ45 jack, GPIO header, and dual USB Type-A connector have not been populated. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables already included.


$89

StereoPi Standard Edition

The world of stereoscopic video awaits! This board is the ultimate interface between two cameras and a Raspberry Pi Compute Module. It comes with all the bells and whistles, including Ethernet, dual USB ports, GPIO header, microSD slot, HDMI output, and more. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables already included.


$125

StereoPi Starter Kit

This kit has everything you need to get started right away. The kit includes one StereoPi Standard Edition board, two V1 cameras (w/ ~20 cm ribbon cables), one Raspberry Pi Compute Module 3 + Lite, and everything in the StereoPi Accessories Kit (two short ribbon cables, one USB power cable, two power cables, one V1/V2 dual-camera mounting plate, and one wide-angle dual-camera mounting plate). We've also included a microSD card pre-imaged with Raspbian and all the stereoscopic video and image demos you see on this project page.


$199

StereoPi Deluxe Kit

This kit includes everything in the StereoPi Starter Kit and adds two wide-angle (160°) cameras (w/ ~20 cm ribbon cables). With this kit, you'll be able to run all of the demos shown on this project page and start experimenting on your own. You will reign supreme over your stereoscopic domain.

Credits

virt2real

We are a small team of geeks who have been making remote-controlled things with livestreaming video since 2010. We've done everything from boats and planes, to robots, copters, and VR helmets. If we can't find the right tools for our projects, we build them ourselves.


Eugene Pomazov

Sergey Serov

Kirill Shiryaev


NexPCB

Recommended

Full-service Manufacturer

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: