Buy bunnie a beer!

Designing hardware is thirsty work. Your donation will help provide bunnie the sustenance to power through long nights.

Buy bunnie a keg!

It takes a village to mass produce hardware: J.A.R.V.I.S. is fiction, gritty factories are reality. Back this tier so I can pour a pint for all the unsung heroes who mill the steel, mind the machines, pack the boxes and manage the supply chain to create the miracle of a product arriving at your doorstep.

Support the EFF!

Add this to your order and get an EFF Multisticker Sheet. The stickers are purchased full-price from the EFF and bundled into your order, so this is a convenient way to help support the EFF's broader efforts while also supporting this campaign. If you believe in the need to reform Section 1201 but video isn't your thing, please also consider donating directly to the EFF!

Orders placed now ship May 29, 2019.

Free Worldwide Shipping

NeTV2 - Just the Board

Just the NeTV2 open video development board plus a 12V power supply. For the power developer who has their own JTAG box or the hobbyist who enjoys spending an afternoon provisioning a Raspberry Pi with the NeTV2 dev tools. Back now - post-campaign pricing goes up by $15! Version with large FPGA only available during the campaign.

Orders placed now ship May 31, 2019.

Free US Shipping / $30 Worldwide

NeTV2 Quickstart Package

For developers and users who want to skip the screwdrivers and go straight to a SSH prompt. The Quickstart Package is a turnkey solution for open video, optimized for video overlay. It's an NeTV2 dev board bundled with a Raspberry Pi 3 B+, 8 GiB SD card with pre-loaded base firmware package, power supply, and our custom HDMI Flex Jumper, all assembled into a case and fully tested. Ready for you to SSH in and load your application code! Back now - post-campaign pricing goes up by $25! Version with large FPGA only available during the campaign.

Orders placed now ship May 31, 2019.

Free US Shipping / $30 Worldwide

NeTV2 - Just the Case

All the plastic parts necessary to protect and mount your NeTV2 dev board: case top and bottom, front bezel, light pipes, standoffs, and screws. If you plan to mate this with your own Raspberry Pi as a video source, you'll also want to get the Custom HDMI Flex Jumper.

Orders placed now ship May 31, 2019.

Free US Shipping / $15 Worldwide

Custom HDMI Flex Jumper

Even the shortest HDMI cables don't quite fit inside the NeTV2 case, so we built a custom flexible PCB that provides impedance-controlled differential pairs to bridge between the Raspberry Pi overlay video source and the NeTV2 open video dev board. Make sure to select the correct FPGA image when using this cable, as it leverages the pinout flexibility of the FPGA to optimize signale routing.

Orders placed now ship May 31, 2019.

Free US Shipping / $10 Worldwide

Making the Case

Backers of this tier get a 25mm space to engrave their name (or pseudonym) in a 10-point open licensed font inside the case. The names will be engraved in the mounting-boss-free area underneath the NeTV2 board mounting.

Orders placed now ship May 31, 2019.

Free Worldwide Shipping

Secrets in Plain Sight

There's an array of cooling holes on the bottom side of the case. But when I look at a 24 x 8 array of dots, I don't see cooling holes. I see 24 bytes (192 bits) that could be used to code a message. Here's an opportunity for one backer to code something that will be milled into hardened tooling steel and stamped into many plastic cases. Final design must have enough holes for sufficient air flow.

Orders placed now ship May 31, 2019.

Free Worldwide Shipping

Deploy, Deploy, Deploy!

Looking to retrofit a set of existing video displays in your office, restaraunt, or store? Get this campaign-exclusive 10-pack deal. It's a bundle of 10 Quickstart Packages. The hardware is fully assembled and tested, so you just have to just SSH in, configure your application, and you're in business.

Orders placed now ship May 31, 2019.

Free US Shipping / $150 Worldwide