Crowd Supply Basics
A collection of common products to design around or add to your toolkit
Ready to Ship
options from
$8 - $27
$8 - $27
Ready to Ship
The products listed here are our recommendations for commodity parts that are generally useful to have on hand. We encourage Crowd Supply projects to design around these parts, or offer them as accessories. Promoting a curated list of common parts allows project creators to focus on their new designs instead of worrying about accessories, and gives backers the freedom to decide if they really need an accessory or can repurpose one they already have. Our hope is that Crowd Supply Basics provides a level of supply chain stability and reduces waste.
Produced by Crowd Supply in Portland, OR.
Sold and shipped by Crowd Supply.
A 20 dBb gain antenna suitable for GPS, GNSS, GLONASS, Galileo, and Beidou that has a magnetic mount and 3 m cable with an SMA connector. Manufactured by Pulse, part number GNSSMMSMA.
A 12 V, 3 A (36 W) AC adapter with interchangeable plugs provided for the US, EU, AU, UK, plus a CCC-compliant plug - connecting via a 2.1 mm center-positive barrel jack.
An EVM for MSP430FRx FRAM development with onboard debug probe, Grove connector, and ambient light sensor.
A 12 V, 1 A (12 W) AC adapter with interchangeable plugs provided for the US, EU, AU, UK, plus a CCC-compliant plug - connecting via a 2.1 mm center-positive barrel jack.
A 12 V, 1.5 A (18 W) AC adapter with interchangeable plugs provided for the US, EU, AU, UK, plus a CCC-compliant plug - connecting via a 2.1 mm center-positive barrel jack.
A Molex 208482-0100 flexible-PCB 2x2 MIMO Wi-Fi (2.4/5 GHz), BT, and Zigbee antenna with adhesive backing and I-PEX MHF connectors.
A 500 mAh, 3.7 V LiPo battery with 2-pin JST termination.
A 3000 mAh, 3.7 V, 57 x 63 x 8.1 mm Mikroe LiPo battery - part number MIKROE-4474.
A 6000 mAh, 3.7 V, 67 x 99 x 8.1 mm Mikroe LiPo battery - part number MIKROE-4475.
Learn how to break embedded security with hardware attacks with this 512-page No Starch Press book by Colin O'Flynn and Jasper van Woudenberg. You will receive the printed book and free access to the PDF, Mobi, and ePub digital versions.
The CW308 puts all the standard requirements onto one board (such as power supplies, oscillators, filters) allowing you to make super-simple hardware-hacking target boards.
A high-efficiency Taoglas TG.55.8113W tilt/swivel monopole whip antenna with an SMA connector covering 600 MHz - 6 GHz, including 4G and 5G bands.
A CE- and UKCA-marked USB 2.0 cable with USB Type-C and USB Type-A connectors. (1 m, ~3.3 ft)
Connects any MSP430 MCU to a computer via USB for real-time, in-system programming and debugging. Includes a 14-conductor cable for board communication and a USB cable. Manufactured by Texas Instruments.
A 183 cm cable with a Micro Type-B and a USB Type-A connector.
A 200 cm cable with a USB Type-C and a USB Type-A connector.
A wall mount 5 V, 1 A AC adapter with a USB Type-A port and US plug.
A wall mount 5 V, 1 A AC adapter with a USB Type-A port and EU plug.
Bluetooth Development Tools - 802.15.1 USB Dongle for Eval of NRF52840
Wall Mount AC Adapters Universal Input 60W USB C Wall Mount Power Supply with US Plug and USB Type C connector
Wall Mount AC Adapters ac-dc, 5/9/12/15/20 Vdc, 3 A, SW, wall-plug, NA, USB type C, no cord, level VI, black
Wall Mount AC Adapters ac-dc, 5/9/12/15/20 Vdc, 3 A, SW, wall-plug, EU, USB type C, no cord, level VI, black
USB Cables / IEEE 1394 Cables Cable, USB, 2000 mm, Type C 2.0 to Type C 2.0, 28 AWG, PVC, Black
5G antenna, 600-6000 MHz range, FPC with cable, adhesive backing, 90.15 mm x 15.2 mm x 0.13 mm
Ethernet / Networking Cable, RJ45, Cat.6A, FRNC, black, 3 m
LTE-A Cat 6 module with M.2 form factor, with Worldwide LTE-A and UMTS/HSPA(+) coverage
A tiny, standalone debugging and programming probe by ST for STM32 microcontrollers. The JTAG/SWD interfaces can communicate with any target STM32 microcontroller. A virtual COM port interface allows the host PC to communicate with the target microcontroller through one UART. STDC14-to-STDC14 flat cable included. USB Type-C cable not included.
2.4 GHz Dipole Tilt Swivel Antenna with SMA connector by Linx Technologies. Length: 83.1 mm
Teensy 4.0 Development Board is designed for evaluation of NXP iMXRT1062 chip and features an Arm® Cortex®-M7 processor.
Teensy 4.1 DEV-16771 is a development board that features an ARM® Cortex®-M7 processor at 600MHz
An industrial-grade memory card with extended endurance.
Abracon External Antennas exhibit low return loss characteristics, high gain, and Low Voltage Standing Ratio (VSWR). These external antennas are linearly polarized and come in a low profile package.
A low-noise active GPS antenna suited for the GPS L1 band. Accepts 3-5V DC and outputs RF via an SMA(m) connector. Optional adhesive mounting.
ABS enclosure grey case 5.12" x 3.94"x 1.18"
A one-meter CAT5E shielded Ethernet cable with a wire gauge of 24 AWG and RJ45 plugs on both ends.
916 MHz ISM Right Angle SMA Connector (LoRaWAN, HaLow, IoT Low-Profile Whip) by Linx Technologies
SanDisk NVMe SSDs in various capacities: 256 GB (P/N SDBPNPZ-256G), and 512 GB (P/N SDBPNPZ-512G).
These NAS-grade solid state drives (SSDs) are rated to last much longer than consumer models, so are perfect for NAS bulk storage. Choose from 256 GB (AP256GPPSS25-R), 512 GB (AP512GPPSS25-R), and 1 TB (AP1TPPSS25-R) capacities. These drives are only available when purchased with a Ten64. User installation required.
One Amphenol FCI EconoStik™ 2.54mm Header. SMD/SMT Mounting style, Straight angled male pins, gold-plating. Voltage rating: 110 V
AVR Pocket Programmer by SparkFun
One single 433MHz Swivel Stick Dipole – SMA-M Stick Antenna by Pulse. (Image includes two antenna to show swivel capability.)
An AC cable with a UK plug and a C13 plug to fit a C14 port.
An AC cable with an EU plug and a C13 plug to fit a C14 port.
A 100 cm cable with a USB Type-C and a USB Type-A connector.
An AC cable with a US plug and a C13 plug to fit a C14 port.
An omnidirectional 2 dBi gain 2.4/5 GHz Wi-Fi antenna with panel-mounting hardware and an approximately 7.5" (19 cm) cable to connect the antenna's SMA connector to the CM4's U.FL connector. It is "certified for use with the Raspberry Pi Compute Module 4".
A 20 MHz, 8-bit, 8-pin DIP AVR MCU with 6 I/O, 8 KiB flash, 512 B SRAM, 512 B EEPROM, a USI interface, and an input voltage range of 2.7 - 5.5 V.
A 20 MHz, 8-bit, 8-pin DIP AVR MCU with 6 I/O, 1 KiB flash, 64 B SRAM, 64 B EEPROM, a SPI interface, and an input voltage range of 1.8 - 5.5 V.
A half-size (3.25 x 2.125 in ~ 8.3 x 5.4 cm) breadboard with a self-adhesive backing
One 9 Ah battery.
A flexible cable (3M part number 5602-44-0142A-300) for connecting a SATA drive to a SATA controller board.
Switching Adapter, Level VI, Desktop, 70 Watt, 90-264VAC Input, ITE & Industrial, 15VDC Output, 5.5x2.1x12mm, Straight, DC Cable 1220mm. By Cincon.
An AC cable with an AU plug and a C13 plug to fit a C14 port.
A bundle of 40 multicolored, 7.8" (200 mm) long silicone-coated 24 AWG jumper wires with female terminations on each end. They are designed for use with standard pitch (.1", 2.54 mm) male headers.
A TG.09 4G/3G/2G cellular hinged SMA(M) mount monopole antenna.
A Hirose U.FL to SMA (jack) bulkhead straight connector with a 1.32 mm diameter cable. Less than -2 dB cable insertion loss up to 6 GHz. Both connectors are gold-plated brass and the cable conductor is silver-coated copper.
Portland, OR · crowdsupply.com
Where the latest and greatest open hardware comes to life.