cuplTag

by cupl

A tap-to-read NFC tag that logs temperature and humidity

View all updates Oct 12, 2021

OSHWA Certification and Manufacturing Progress

by Malcolm Mackay

Here’s a brief update on Cupl’s progress:

  1. The population of our first ten boards is progressing. We are expecting shipment to the UK next week. The photo below was taken by our CEM this morning (10/9).
  1. We have received certification from OSHWA as UK000033.

  2. The NFC Forum have kindly included us in their Product Showcase.

About the Author

Malcolm Mackay

cuplsensor


$946 raised

of $1 goal

Funded!

Pledge Now

$29

cuplTag

One cuplTag, factory configured to sample temperature and humidity at 10 minute intervals. Works with the cupldeploy platform. Requires a CR1220 battery (not included). Includes one 2x4-way 2.54 mm male header, one 1x2-way 2.54 mm male header, one 2-way 2.54 mm jumper, and printed instructions.


$10

40 Jumper Wires - Female/Female

From the Crowd Supply Basics project.

A bundle of 40 multicolored, 7.8" (200 mm) long silicone-coated 24 AWG jumper wires with female terminations on each end. They are designed for use with standard pitch (.1", 2.54 mm) male headers.


$18

TI MSP-EXP430FR2355 Dev Kit

From the Crowd Supply Basics project.

Includes the EZ-FET, a basic, low-cost MSP430 programming and debugging solution

An EVM for MSP430FRx FRAM development with onboard debug probe, Grove connector, and ambient light sensor.


$153

MSP-FET Flash Emulation Tool

From the Crowd Supply Basics project.

A full-featured programmer, spy-bi-wire debugger, and usb-to-serial converter for the MSP430

Connects any MSP430 MCU to a computer via USB for real-time, in-system programming and debugging. Includes a 14-conductor cable for board communication and a USB cable. Manufactured by Texas Instruments.

Credits

cupl

cupl develops NFC environmental sensors.


Malcolm Mackay

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: