EEZ Bench Box 3

by Envox

Modular, open-source test & measurement chassis

View all updates Dec 02, 2019

Thank You & Data Logging Automation

by Denis Kotlar (a.k.a. prasimix)

Hi everyone,

First of all, I would like to thank you for your support and for helping us reach one-third of our funding goal within two hours. The start of this campaign has been amazing.

In this update, I would like to introduce BB3’s data logging functionality, which is one of the reasons why that touchscreen display really matters. With just a few simple steps, you can capture data and display them directly on your device. You are then just one click away from transferring that information from the BB3’s SD card to your computer, where you can visualize, analyze, archive, and share it.

Watch the short video below to see this feature in action:

Thanks again for your support and trust. Please feel free to recommend BB3 to others. By doing so, you will greatly improve this project’s chances of success.

And stay tuned for our next update!

Cheers,

Denis

About the Author

Denis Kotlar (a.k.a. prasimix)

envox


$129,643 raised

of $85,000 goal

152% Funded! Order Below

Product Choices

$10

Support EEZ Studio Development

EEZ Studio is a cross-platform free and open source BB3 development environment but also attractive SCPI controller that is used to access many T&M devices using SCPI commands. Its development and support cost us money and your donation will help us to keep it alive and kicking.


$165

BB3 Enclosure & Bare Boards

A BB3 enclosure kit with a wire harness, nuts and bolts for the three core modules, a 4.3" TFT touchscreen display, an encoder knob, and an 80 mm fan. Includes a set of bare PCBs for building the three core modules (AUX-PS, MCU STM32F7, and BP3C DIB 3-slot backplane) as well as PCBs for building one DCM220 two-channel peripheral power module and two single-channel peripheral power modules (either the DCP405 or the DCP405B, as they can be assembled using the same PCB). Suitable for builders with the necessary skill, time, and patience.


$350

BB3 - Starter (Without Peripheral Modules)

A BB3 enclosure kit without bare PCBs but with fully-assembled core modules (AUX-PS, MCU STM32F7, and BP3C DIB 3-slot backplane). The Starter provides an environment for experimenters who are willing to build their own modules or who want a specific BB3 configuration (such as a six-channel BB3).


$650

BB3 - Two Channel (Full)

A BB3 starter kit and two full-featured DCP405 single-channel (40 V, 5 A) peripheral power modules, including an AC/DC power module for each. A two-channel programmable power source with advanced features: remote sensing, remote programming, a down-programmer, and additional OVP (with crowbar).


$750

BB3 - Four Channel (Full)

A BB3 starter kit, two full-featured DCP405 single-channel (40 V, 5 A) peripheral power modules, and one dual-channel DCM220 peripheral power module. Includes all three necessary AC/DC modules. This is the two-channel full kit, expanded to include two additional programmable power sources.


$179

DCP405 One Channel Module (Full)

A full-featured DCP405 single-channel (40 V, 5 A) peripheral power module with remote sensing, remote programming, a down-programmer and crowbar OVP. Includes an AC/DC module.


$125

DCM220 Two Channel Module

A DCM220 dual-channel (2 x 20 V, 4 A) peripheral power module and its AC/DC module.


$59

Cable Set

Two pairs of high quality, silicone, color marked (black-red), 1 m connecting cables; a pair of clip-on probes; and a pair of insulated crocodile clips.

Credits

Envox

Envox d.o.o. is home of the Envox Experimental Zone (EEZ), an open source initiative to bridge the gap between DIY / hobbyist / educational / low-budget and professional / commercial test and measurement solutions.


Denis Kotlar (a.k.a. prasimix)

Martin Vladic


Mouser Electronics

Component Provider

Varisom

Recommended

Metal Fabrication

TME Electronic Components

Components & Hardware Sourcing

Jedinstvo - Kartona┼ża d.o.o.

Recommended

Printing & Packaging

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: