EEZ Bench Box 3

by Envox

Modular, open-source test & measurement chassis

View all updates Nov 18, 2019

The Final Countdown Has Begun!

by Denis Kotlar (a.k.a. prasimix)

I would like to thank you all for your patience and support thus far. We are happy to inform you that the EEZ Bench Box 3 (BB3) campaign is set to launch very soon. In fact, we will go live tomorrow, November 19th, at 3 PM PST. And **we are offering Early Bird discounts**, so keep your eye on that clock!

The following products will be made available through this campaign:

LevelDescription
BB3 Enclosure & Bare BoardsA BB3 enclosure kit with a wire harness, nuts and bolts for the three core modules, a 4.3" TFT touchscreen display, an encoder knob, and an 80 mm fan. Includes a set of bare PCBs for building the three core modules (AUX-PS, MCU STM32F7, and the BP3C DIB 3-slot backplane) and three peripheral modules (two DCP405Bs and one DCM220). Suitable for builders with the necessary skill, time, and patience.
BB3 StarterA BB3 enclosure kit without bare PCBs but with fully-assembled core modules (AUX-PS, MCU STM32F7, and BP3C DIB 3-slot backplane). The Starter provides an environment for experimenters who are willing to build their own modules or who want a specific BB3 configuration (such as a six-channel BB3).
BB3 Two Channel (Basic)A BB3 starter kit and two basic DCP405B single channel (40 V, 5 A) peripheral power modules, including an AC/DC module for each. A great two-channel programmable power source suitable for most of everyday tasks. Expandable to three or four channels.
BB3 Two Channel (Full)A BB3 starter kit and two full-featured DCP405 single-channel (40 V, 5 A) peripheral power modules, including an AC/DC module for each. A two-channel programmable power source with advanced features: remote sensing, remote programming, a down-programmer, and additional OVP (with crowbar).
BB3 Four Channel (Basic)A BB3 starter kit, two basic DCP405B single-channel (40 V, 5 A) peripheral power modules, and one dual-channel DCM220 peripheral power module. Includes all three necessary AC/DC modules. This is the two-channel basic kit, expanded to include two additional programmable power sources.
One Channel (Full) Power ModuleA full-featured DCP405 single-channel (40 V, 5 A) peripheral power module with remote sensing, remote programming, a down-programmer and crowbar OVP. Includes an AC/DC module.
One Channel (Basic) Power ModuleA basic DCP405B single-channel (40 V, 5 A) peripheral power module and its AC/DC module.
Two Channel Peripheral ModuleA DCM220 dual-channel (2 x 20 V, 4 A) peripheral power module and its AC/DC module.
Cable SetTwo pairs of high quality, silicone, color marked (black-red), 1 m connecting cables; a pair of clip-on probes; and a pair of insulated crocodile clips.

**The first 50 backers will get a BB3 Two Channel (Full) for the price of a Two Channel (Basic).**

Please feel free to reach out by email or join us at eez-open on Discord if you have questions about the campaign.

Cheers,

Denis (@prasimix)

About the Author

Denis Kotlar (a.k.a. prasimix)

envox


$143,345 raised

of $85,000 goal

168% Funded! Order Below

Product Choices

$10

Support EEZ Studio Development

EEZ Studio is a cross-platform free and open source BB3 development environment but also attractive SCPI controller that is used to access many T&M devices using SCPI commands. Its development and support cost us money and your donation will help us to keep it alive and kicking.


$165

BB3 Enclosure & Bare Boards

A BB3 enclosure kit with a wire harness, nuts and bolts for the three core modules, a 4.3" TFT touchscreen display, an encoder knob, and an 80 mm fan. Includes a set of bare PCBs for building the three core modules (AUX-PS, MCU STM32F7, and BP3C DIB 3-slot backplane) as well as PCBs for building one DCM220 two-channel peripheral power module and two single-channel peripheral power modules (either the DCP405 or the DCP405B, as they can be assembled using the same PCB). Suitable for builders with the necessary skill, time, and patience.


$360

BB3 - Starter (Without Peripheral Modules)

A BB3 enclosure kit without bare PCBs but with fully-assembled core modules (AUX-PS, MCU STM32F7, and BP3C DIB 3-slot backplane). The Starter provides an environment for experimenters who are willing to build their own modules or who want a specific BB3 configuration (such as a six-channel BB3).


$675

BB3 - Two Channel (Full)

A BB3 starter kit and two full-featured DCP405 single-channel (40 V, 5 A) peripheral power modules, including an AC/DC power module for each. A two-channel programmable power source with advanced features: remote sensing, remote programming, a down-programmer, and additional OVP (with crowbar).


$775

BB3 - Four Channel (Full)

A BB3 starter kit, two full-featured DCP405 single-channel (40 V, 5 A) peripheral power modules, and one dual-channel DCM220 peripheral power module. Includes all three necessary AC/DC modules. This is the two-channel full kit, expanded to include two additional programmable power sources.


$190

DCP405 One Channel Module (Full)

A full-featured DCP405 single-channel (40 V, 5 A) peripheral power module with remote sensing, remote programming, a down-programmer and crowbar OVP. Includes an AC/DC module.


$125

DCM220 Two Channel Module

A DCM220 dual-channel (2 x 20 V, 4 A) peripheral power module and its AC/DC module.


$59

Cable Set

Two pairs of high quality, silicone, color marked (black-red), 1 m connecting cables; a pair of clip-on probes; and a pair of insulated crocodile clips.

Credits

Envox

Envox d.o.o. is home of the Envox Experimental Zone (EEZ), an open source initiative to bridge the gap between DIY / hobbyist / educational / low-budget and professional / commercial test and measurement solutions.


Denis Kotlar (a.k.a. prasimix)

Martin Vladic


Mouser Electronics

Component Provider

Varisom

Recommended

Metal Fabrication

TME Electronic Components

Components & Hardware Sourcing

Jedinstvo - Kartona┼ża d.o.o.

Recommended

Printing & Packaging

Drives and Motors d.o.o.

PCB & PCBA Manufacturing

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: