Pixelblaze V3

by Hencke Technologies

A Wi-Fi-enabled, live-codable LED controller with a web-based development environment

View all updates Dec 16, 2020

The Pixelblaze V3 Campaign Ends In a Day!

by Benjamin H

Only hours left in the campaign!

Thank you all for your support in making this campaign a huge success! We look forward to keeping you updated as production progresses.

A Matter of Time

Speaking of time, did you know that with the discovery service, Pixelblaze also knows the time and can get the current second, minute, hour, day, week, month, and year in your timezone?

Check out this blending RGB clock pattern with a ton of different modes and UI controls with 16 hand/arm combinations and in total 8 sliders for changing the look:

Four 8x8 LED Matrix in a 16x16 panel with the RGB Clock Pattern

Four 8x8 LED Matrix in a 16x16 panel with the RGB Clock Pattern

More info here, with some videos of various settings: https://forum.electromage.com/t/rgb-clock-2d-pattern/818

Pixel enchanters have also used the time keeping information to make functional illumination that changes color temperature over the course of the day. Pixelblaze supports RGBW LEDs, which are great for both functional illumination and aesthetic lighting.

About the Author

Benjamin H

im889  ·  simap  ·   Vancouver, WA


$40,388 raised

of $1 goal

Funded! Order Below

Product Choices

$35

Pixelblaze V3 Standard

The Pixelblaze V3 Standard comes with a solderable pin header and screw terminal


$35

Pixelblaze V3 Pico

Due to its tiny size, the Pixelblaze Pico does not come with solderable headers. You don't need them!


$29

Pixelblaze Sensor Board

Use sound, movement, light, and more to control your Pixelblaze with this add-on. Comes with two solderable terminal headers


$19

Pixelblaze Output Expander

Give Pixelblaze 8 outputs and simplify wiring and power distribution, up to 64 outputs in a single system. Drive any combination of WS2812/APA102 type LEDs and up to 800/600 pixels per output. Comes with three header terminals and one screw terminal, all solderable.


$18

8x8 LED Matrix

Made in-house right alongside the Pixelblaze, this 67.5 x 67.5 mm (about 2.7" square) LED Matrix is perfect for interesting little projects, perhaps even...an LED cube? Comes with one solderable 15 cm wired header.

Credits

Hencke Technologies

Hencke Technologies, Inc. is the company behind the ElectroMage and Pixelblaze product lines. We are a product design and manufacturing company in Vancouver, WA that specializes in LED and IoT technology.


Benjamin Hencke

CEO of many hats

Chris "TP" Blue

Production Specialist

Jeff Vyduna

Pixel Enchanter

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: