BLYST Nano

by I-SYST inc.

The finger-tip sized ARM Cortex-M4F module with BT 5, BT Mesh, and 30 I/O

View all updates Dec 14, 2018

Ready to Ship

First, we’d like to thank you all very much for your support of the BLYST Nano.

We have received the BLYST Nano modules from the factory. They went through random testing in house, and all looks good. We’ve put in the effort to create a quality product by using a high temperature grade and gold-plated PCBs for the BLYST Nano modules, which make them easy for hand assembly. We hope that you like them, too. We have shipped the modules and the IDAP-Links to Crowd Supply for fulfillment, and some orders will be shipping out in the next few days.

Unfortunately, the breakout boards and the sensor boards could not be produced at the same time, as we needed to have the modules produced and validated first. We will start producing those in the coming weeks and be ready to ship in January 2019. Please note, if your order includes both BLYST Nano modules and breakout or sensor boards, your order will ship in January.

If you have moved or need to update your shipping address for any reason, please do so through your Crowd Supply account.

Thank you very much !!


$6,026 raised

of $1,000 goal

602% Funded! Order Below

Product Choices

$18

BLYST Nano

One BLYST Nano module.


$32

BLYST Nano x 2

Two BLYST Nano modules.


$71

BLYST Nano x 5

Five BLYST Nano modules.


$135

BLYST Nano x 10

Ten BLYST Nano modules.


$1,300

BLYST Nano 100 Pack

A pack of 100 BLYST Nano modules in cut tape.


$168

BLYST Nano Exploration Kit

Two BLYST Nano modules, one DIP32 Breakout Board (assembled with BLYST Module), one Sensor Board (assembled with BLYST Module), and an IDAP-Link CMSIS-DAP Debug JTAG. This is the perfect starter kit.


$30

BLYST Nano Breakout

One fully assembled DIP32 Breakout Board with BLYST Nano module.


$65

BLYST Nano Sensor

One fully assembled Sensor Board with BLYST Nano module.


$55

IDAP-Link CMSIS-DAP Debug JTAG

This a CMSIS-DAP Debug JTAG board for programming and debugging any ARM Cortex-M series supported the the IDE. Compatible with most IDE such as Keil, CrossWorks, Eclipse (requires OpenOCD), Arduino (require OpenOCD), etc ... It can used for production parallel programming of any Nordic nRF5 series SoC.

Credits

I-SYST inc.


Hoan Hoang

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: