LimeSDR

by Lime Microsystems

Flexible, next-generation, open source software-defined radio

View all updates Jan 16, 2017

Shipping Will Start in 24 Hours

The first batch of LimeSDRs and accessories has arrived safely at the Crowd Supply warehouse.

Address Changes Must Be Processed Now

Shipping of the first batch of orders will commence within the next 24 hours. If you need to change your address, you should do it now by logging into your Crowd Supply account and viewing your order.

When Will My Order Ship?

The only way to know to know with certainty if your order is shipping within the next few days is if you receive a shipping confirmation email from Crowd Supply. The logistics of shipping hundreds of varied orders around the world is complex enough that it’s not possible to tell you your exact place in line. For example, Crowd Supply will likely send several test shipments to different countries to gauge how well they get through customs and the timing of future shipments to those countries may be affected by the results.

When Will My Order Arrive?

Once your order has shipped, you will receive a shipping confirmation email with a tracking number. For orders destined for outside the US, it is not uncommon for the tracking information to cease being updated after it leaves the US, though for some countries (e.g., UK, Germany, Australia) the packages can continue to be tracked using your national postal website and the same tracking number. If there is a delay in delivering your package, you should check with your local customs office to make sure they are not holding it and waiting for you to pick it up.


$3,459,288 raised

of $500,000 goal

691% Funded! Order Below

Product Choices

$315

LimeSDR USB Type-A

The LimeSDR is based on Lime Microsystem’s latest generation of field programmable RF transceiver technology, combined with FPGA and microcontroller chipsets. These connect to a computer via USB 3 with a Type-A connector. LimeSDR then delivers the wireless data and the CPU provides the computing power required to process the incoming signals, and to generate the data to be transmitted by the LimeSDR to all other devices.


$99

Acrylic Case

A layered acrylic case to protect your LimeSDR. Antenna not included - separate purchase available.


$129

Lime AC Tetra Case

From the Lime AC Case project.

An aluminum case for LimeSDR USB Type-A, with one fan and 12 U.FL-to-SMA cables. This case allows for all on-board RF and CLK lines to be externally available.


$599

LimeSDR with Aluminum Kit

Start developing apps based on Lime Microsystem’s latest generation of field programmable RF transceiver technology. This board comes with fancy aluminum casing. The board will be delivered with turnkey support for a diverse range of SDR ecosystem software, a powerful API and rapid prototyping environment. All the boards in this category will come with a fancy Aluminum casing coated with high quality material, cables, and antennas for a quick set up.


$799

Ultimate LimeSDR With PCIe Interface

Start developing apps based on Lime Microsystem’s latest generation of field programmable RF transceiver technology. The board will be delivered with turnkey support for a diverse range of SDR ecosystem software, a powerful API and rapid prototyping environment. All the boards in this category will come with a PCIe interface, cables and Antennas for a quick set up.


$13

Multi-band 4G/3G/2G Monopole Antenna

From the Crowd Supply Basics project.

Use one antenna for each of LimeSDR's four channels. Connect each antenna to the LimeSDR using a U.FL-to-SMA cable.

A TG.09 4G/3G/2G cellular hinged SMA(M) mount monopole antenna.


$8

U.FL-to-SMA Cable

From the Crowd Supply Basics project.

Use one cable for each of LimeSDR's four channels. The 100 mm version works well with the Acrylic Case.

A Hirose U.FL to SMA (jack) bulkhead straight connector with a 1.32 mm diameter cable. Less than -2 dB cable insertion loss up to 6 GHz. Both connectors are gold-plated brass and the cable conductor is silver-coated copper.


$169

GPIO Board

This stackable expansion board for the LimeSDR provides individually settable, bi-directional level-shifted I/O for FPGA GPIO 0-7. Each I/O has a high-voltage and power Darlington drive stage suitable for inductive loads, such as coaxial relays. LimeSDR not included.

Credits

Lime Microsystems

Working toward the democratization of wireless communication through an open source ideology.


Jessica Gillingham

Christy Chuang

Ebrahim Bushehri

Andrew Back

Zack Tamosevicius

Richard Jonaitis

Josh Blum

Lexi Hatziharalambous

Karolis Kiela

Andy Chang


ASE Group

IC manufacturer

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: