StereoPi v2

by StereoPi

The open-source stereoscopic camera based on Raspberry Pi with Wi-Fi, Bluetooth, and an advanced powering system

View all updates Apr 08, 2021

SLP v2 and Oculus Quest Beta Testing Programs are Now Open, and Production Has Begun!

by Eugene Pomazov

Beta Testing Programs Are Open!

On our crowdfunding page, you might have seen the following preview videos of our Oculus Quest application and our SLP v2 (StereoPi Livestream Playground v2) Raspberry Pi OS image.

If you are the lucky owner of a StereoPi v1, you can jump into these beta programs right now! And, if you don’t have a StereoPi but you do have a Raspberry Pi with a camera, you can still play with these tools, as we made sure to maintain 100% compatibility with the classic Raspberry Pi.

You can find more details on the Oculus Quest app here on our forum.

As for SLP v2, you can join our advanced user testing program here. Next week, we’ll add more details about SLP v2 to our Wiki, to make it easier for everyone to give it a try.

Production Status

As you know, hardware production involves a great many potential risks. We did our best to account for those we could anticipate, but one unexpected risk has managed to slow us down slightly. We promised to keep you informed about any issues that came up during production, so here’s what happened:

Though we tried to get access to our campaign funds the week we hit our funding goal, we were only able to do so yesterday. As a result, our manufacturing run has been delayed by approximately two and a half weeks. We’ll do our best to accelerate the production schedule, but right now our target delivery time has shifted from the 30th of April to the second half of May.

The good news is that, as of today, we have received all campaign funds and the production process has begun.

That which does not kill us makes us stronger. We had some issues with StereoPi v1 production as well, but we overcame them and successfully delivered all products to our backers. Rest assured that we’ll do the same for StereoPi v2.

Thank you for your understanding and support!

About the Author

Eugene Pomazov

StereoPi  ·  Realizator  ·   St. Petersburg


$79,834 raised

of $35,000 goal

228% Funded! Order Below

Product Choices

$49

StereoPi v2 Slim

Perfect for DIY ninjas and those wanting to embed StereoPi in a tight space. This board is the same as the standard edition, but without all the bulky connectors - the Ethernet RJ45 jack, GPIO header, and dual USB Type-A connector have not been populated. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables and three jumpers already included.


$55

StereoPi v2 Standard

The world of stereoscopic video awaits! This board is the ultimate interface between two cameras and a Raspberry Pi Compute Module. It comes with all the bells and whistles, including Ethernet, dual USB ports, GPIO header, microSD slot, HDMI output, and more. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables and three jumpers already included.


$185

StereoPi v2 Camera Kit

Everything you need to assemble your camera! Includes StereoPi Standard, CM4 + external antenna, 2 cameras (IMX219, 160 FOV), a TFT screen, a shot button, camera-mount plates, nuts & bolts, 3 jumpers, a 15 cm tripod, and 2 microSD cards with pre-written SLP and OpenCV images!


$25

StereoPi PoE HAT

This board adds Power over Ethernet option to your StereoPi


$55

StereoPi HQ Metal Housing

Metal housing for a couple of HQ cameras with advanced adjustments features. Includes StereoPi HQ housing base + carriages, 2 x HOYA CM500 filters (8.9 x 8.9 x 1 mm), a set of nuts/bolts/washers for assembly, and a tripod. To use this kit you need a couple of HQ cameras and a couple of C or CS lenses.

Credits

StereoPi

We are a small team of geeks who have been making remote-controlled things with livestreaming video since 2010. We've done everything from boats and planes, to robots, copters, and VR helmets. If we can't find the right tools for our projects, we build them ourselves.


Eugene

Sergey Serov


NexPCB

Recommended

Full-service Manufacturer

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: