Chibitronics
Books
LEDs

Circuit Stickers

Circuit Stickers are peel-and-stick electronics for crafting circuits. Use them to add electronics to any sticker-friendly surface: paper, fabric, plastic, the sky's the limit!

$216,487 raised

of $1 goal

Funded! Order Below

Limited items in stock. Order below.

$6 - $800

View Purchasing Options

Recent Updates

You'll be notified about news and stock updates for this project.

What are Circuit Stickers?

Circuit Stickers are electronic stickers that you can use to build glowing, sensing, and interactive projects without any complicated equipment or programming skills. All you need is your imagination.

Building circuits with them is fun and easy — just stick them onto a surface like you would with a normal sticker, and build up a circuit by sticking several stickers together and adding a battery. They’re an approachable way to learn and create electronics through craft, whether you’re just starting out with circuits or creating complex interactive artworks.

Robot card: blushes when you press on its heart, with "Thank You!" spelled using circuitry

Every starter kit comes with the Circuit Sticker Sketchbook, a step-by-step tutorial guide that will get you crafting with electricity in no time!

What can I make with Circuit Stickers?

Circuit stickers are light, paper-thin and flexible circuit boards cut into small, fun shapes with anisotropic conductive adhesive on the back. The adhesive sticks to most surfaces and can be used with virtually any conductive materials as “wiring”— such as conductive threads and paints or even wires and aluminum foil from your kitchen.

We provide a roll of copper tape as a starter because it is easy to use and sticks virtually to anything. It’s also very soft, conductive and solderable, so you can make the circuit as big as you want. If you run out of copper tape, you can get more at your local hardware store in the gardening section— it’s normally used to keep snails and slugs out of the garden!

You can re-stick Circuit Stickers a few times, just like regular stickers. We also provide extra anisotropic conductive adhesive to "re-sticker" old stickers. Advanced users can also solder to the stickers for more permanent works.

Circuit Stickers works with virtually any conductive material, including Bare Conductive paint and Circuit Scribe conductive ink pens.

Using these diverse materials, you can start putting electronics anywhere! Make interactive electronic murals for your ceilings, walls and windows. Create touch-sensitive plants that glow, or a light yourself up with conductive body paint. You can even create artwork with the circuitry itself!

What if I’ve never made a circuit before?

No worries! We have been working with educators to create the Circuit Sticker Sketchbook, a guidebook that will walk you through making basic LED circuits, DIY paper switches and a pressure sensor. You can complete the circuits right on the pages of the book— like a coloring book except now you’re coloring with electronics. When you’re done, you will have an interactive sketchbook of functioning circuits!

Create circuits right inside the Circuit Sketchbook

We have also prepared several tutorial videos and how-to guides to help get you started at our education website, and you can ask questions at our community forum!

Here’s an example of a tutorial on how to complete the very first project in your Circuit Sticker Sketchbook:

And here is a sampling of step-by-step tutorials you can use to learn more about electronics and how to craft with it:

Introduction Tutorials

Introduction to Copper Tape learn the difference between conductive vs. non-conductive adhesive tapes and how to “draw” with copper tape

1. Simple Circuit Tutorial turn on one LED light

2. Parallel Circuit Tutorial turn on multiple LEDs with one battery

3. DIY Switch Tutorial make your circuits interactive with this paper switch

4. Blinking Slide Switch Tutorial create different blinking effects using this switch

5. Pressure Sensor Tutorial make your LEDs fade in and out using this DIY pressure sensor Advanced

Effect Stickers Template makes your LEDs fade, blink, twinkle or pulse a heartbeat rhythm

Sound Sensor Template makes your circuits responsive to sound, tapping and wind

Light Sensor Template makes your circuits responsive to light

Trigger Sensor (Timer) Template use a touch sensor to trigger your lights on or off for several seconds

Attiny85 Microcontroller Template use the microcontroller sticker as an advanced touch sensor or reprogram with Arduino for custom functions

Paper Battery Holder Tutorial Use this paper battery envelope to add your battery to any surface without a binder clip!

Projects

Word Circuitry Use conductive ink pens to turn letters and words intro circuits

Sailboat Card use conductive ink pens to create a sky of twinkling stars when you swipe your finger across the card

Who are Circuit Stickers for?

Anyone who wants to start building interactive projects! We’ve run workshops all over the world and gotten very positive responses from designers, artists, engineers, kids, students, and teachers. Now we’re excited to bring them to you, and see what you can make with them!

Many have enjoyed creating with Circuit Stickers including the Girl Scouts, National Writing Project teachers, FOO and the Exploratorium Tinkering Studio.

We’ve designed Circuit Stickers to be as easy-to-use as possible, so you don’t need a background in electronics to get started—our interactive sketchbook will teach you the basics. Technically advanced users can program Circuit Stickers and even integrate traditional electronics to create more complex works. Circuit Stickers are also made the work well with a wide range of materials, so you can use whatever art and craft techniques that are most fun and familiar to you!

Circuit Stickers are made with lead-free materials, but make sure to keep these small parts away from small children—they’re not good to eat!

Meet the Circuit Stickers!

LED Stickers are simple LED lights available in white, red, yellow and blue. These come with every starter kit! Effects Stickers generate an effect to control your LEDs (or other output!). Current effects are blink, fade, twinkle, and heartbeat. Sensors Stickers include a light sensor, a microphone sensor for detecting sound, and a timer circuit that turns on your circuit for five seconds at a time. Touch sensor/Microcontroller Sticker comes set up to work as a touch sensor, but advanced users can program the onboard ATTiny85 microcontroller to do anything they want.

Our Offerings

We’ve created a starter kit that contains everything you need to use Circuit Stickers: LED stickers, batteries, various conductive materials. You can also order more advanced stickers and additional LED stickers and sketchbooks.

The Circuit Stickers Starter Kit has everything you need to start building your own circuits.

You can order more than one offering by returning to this page and adding another offering to your cart.

STEM Starter Kit

Everything you need to get started with circuit stickers:


Effects add-on

Four effects stickers so you can add blink, fade, twinkle and heartbeat effects to your projects!

Sensors add-on

Sensors to make your projects even more interactive:

*ISP interface breakout board for advanced users to reprogram the microcontroller


White LED Mega Pack - 30 pcs

A set of 30 white LED stickers.

Color LED Mega Pack - 30pcs

A set of 10 each red, yellow, and blue LED stickers.

Tropical LED Mega Pack - 30pc

A set of 10 each orange, green, and purple LED stickers.

Circuit Sticker Sketchbook - English

A copy of the Circuit Sticker Sketchbook in English, perfect for teachers who want to share the Starter Kit with more than one student.

Classroom Pack

The Classroom Pack is a class pack for a class size of 30. With 90 circuit stickers and 90 feet of copper tape, educators can conduct several projects per student. Free project templates can be downloaded on www.chibitronics.com/learn. Batteries not included.


Copper Tape add-on

One roll of copper tape 5mm (0.2 inch) wide x 5m (16.4 foot) long.

Z - tape add-on

One strip of Z-tape, 2” wide x 5” long.

Who are we?

Chibitronics is collaboration between bunnie and Jie Qi . Jie is a PhD student at the MIT Media Lab and her research is all about combining arts and crafts with electronics and programming. bunnie is the Director of Studio Kosagi; he is a hacker who designs and manufactures hardware.

We believe that anyone and everyone is capable of expressing themselves and telling their stories through building electronics, using skills and materials that they already know. Electronics don’t have to come in boxes and cases as rigid indecipherable green boards attached with screws. With Circuit Stickers, engineering a circuit feels like playing and crafting because it IS playing and crafting. Technology can be as varied as our own experiences. By helping everyone have a voice in its creation, we hope to enable a world of new technologies designed by everyone for their own unique (technical and artistic) needs.

Example paper electronics pages from Jie’s Electronic Popables book.

More info!

Please visit our website for more crafting resources and FAQ. We also have a wiki for technical information. For product safety information, please go here.

In the Press

Gizmag

"‘Cute circuitry’ is not a term you hear often – if at all – but it could be used to describe Chibitronics, which is a crafty merging of electronics and paper."

PSFK

"Circuit Stickers are the perfect product to change the way people think about electronics."

Wired

"Most definitely for all age groups."

Educator Innovator Logo

Educator Innovator

"A demonstration of what is possible when art, design and science intersect."

Boing Boing

Boing Boing

"I’m sure lots of people will be kicking themselves if they don’t manage to grab some of these while they can."

Gigaom

"They take circuits out of the traditional breadboard environment (including plenty of wires) and allow it to go pretty much anywhere."

Make

"It has the potential to be as effective for the technology education community as what we saw with the introduction of LEGO Mindstorms 15 years ago."

Laughing Squid Logo

Laughing Squid

"Circuit Stickers are electronic stickers that can be peeled, stuck to surfaces, and combined to build circuits."

Hackaday

Hackaday

"A very creative way to get basic electronics into children’s hands through arts and crafts."

Tested Logo

Tested

"It’s a very good time to be interested in circuitry and crafting, especially if you have only an amateur understanding of how circuitry works."

Geeky Gadgets

"If you fancy building simple electronic circuits but don’t own a soldering iron…you might be interested in…Circuit Stickers."

Make

"I foresee this becoming a popular way to not only build simple electronics projects on flexible materials, but to teach basic circuit skills as well."

Adafruit Industries

"Enables electronics to be integrated in a range of non-traditional material."

Tech The Future Logo

Tech The Future

"In combination with conductive materials used for ‘wiring’ such as conductive paint or thread, people can add their own electronic creations to clothing, paper and plastic."

Ask a Question

Produced by Chibitronics in Singapore.

Sold and shipped by Crowd Supply.

STEM Starter Kit

Everything you need to get started with circuit stickers: 6 white LED stickers, 2 each of red, yellow, and blue LED stickers, 1 roll of copper tape (5 meters), 2 CR2032 coin cell batteries, 2 small binder clips, 1 copy of the "Circuit Sticker Sketchbook"

$34 $8 US Shipping / $18 Worldwide

Conductive Fabric Tape Swatches

Get 64 swatches of conductive fabric tape, pre-cut to 0.2"x0.6" (5mmx15mm) patches for your projects. It's a tiny bridge of durable conductive fabric with a highly conductive adhesive on one side. Use it to patch gaps in copper tape, make T-junctions, build live hinges, or connect to our Love to Code products in a semi-permanent fashion.

$12 $8 US Shipping / $18 Worldwide

Effects add-on

Four effects stickers so you can add blink, fade, twinkle and heartbeat effects to your projects!

$19 $8 US Shipping / $18 Worldwide

Z-tape add-on

One strip of Z-tape, 2” wide x 5” long.

$6 $8 US Shipping / $18 Worldwide

Copper Tape add-on

One roll of copper tape 5mm (0.2 inch) wide x 5m (16.4 foot) long.

$8 $8 US Shipping / $18 Worldwide

Classroom Pack

The Classroom Pack is a class pack for a class size of 30. With 90 circuit stickers (all white, or RYB) and 90 feet of copper tape, educators can conduct several projects per student.

$116 $8 US Shipping / $18 Worldwide
RYB LEDs

RYB LED Mega Pack

A set of 10 each red, yellow, and blue LED stickers.

$30 $8 US Shipping / $18 Worldwide
White LEDs

White LED Mega Pack

A set of 30 white LED stickers.

$30 $8 US Shipping / $18 Worldwide

Tropical LED Mega Pack - Limited Edition

A set of 10 each of green, orange, and purple LED stickers (30 total).

$30 $8 US Shipping / $18 Worldwide

Chibi Clip Accessory

An essential companion to the Chibi Chip, the Clip enables rapid testing and re-use of the Chip. With the Clip, attaching (and detaching) your Chip to circuits built on paper is as easy as using a clothespin.

$15 $8 US Shipping / $18 Worldwide

Deluxe Kit 10-pack

$800 Free US Shipping / $18 Worldwide

Circuit Sticker Sketchbook - English

A copy of the Circuit Sticker Sketchbook in English, perfect for teachers who want to share the Starter Kit with more than one student.

$12 $8 US Shipping / $18 Worldwide

About the Team

Chibitronics

Singapore  ·   chibitronics.com

Chibitronics is a research collaboration between Jie Qi from the MIT Media Lab and bunnie from Studio Kosagi.

Bunnie
Engineer & Operations
Jie Qi
Designer & Researcher

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects