Teledatics Incorporated


The first open source 802.11ah scalable long range Wi-Fi development platform for engineers and experimenters

$34,871 raised

of $7,900 goal

441% Funded! Order Below

In stock. Order now, ships within three business days.


View Purchasing Options

Recent Updates

You'll be notified about news and stock updates for this project.

Halo TD-XPAH is the first open source open hardware IEEE 802.11ah Wi-Fi development platform available to creators, makers, engineers and experimenters. The IEEE 802.11ah Wi-Fi protocol builds on Wi-Fi 6, adding the ability to reach a minimum of one kilometer (one-half mile) from access point to client. 802.11ah is designed to support up to several hundred clients per access point via Restricted Access Window, a form of Time Division Multiple Access (TDMA). It also supports 802.11s mesh networks where distant nodes can link to and hop through nodes closer to home to extend range further.

The TD-XPAH board supports two modes of operation: a USB dongle mode attached to an external system and a standalone mode. Since 802.11ah is a Wi-Fi protocol, the TD-XPAH supports TCP/IP and works with standard networking. Our open hardware accessory board Kicad "hAT" template can be used to create custom hardware for remote control, monitoring, and sensor systems that extend existing wired or wireless networks. We include three hardware hAT designs with the TD-XPAH launch that add Ethernet connectivity, standard 2.4 GHz Wi-Fi communication, and an air quality sensor platform.

High quality wireless communication anywhere, anytime

Here’s just a few examples of what Halo TD-XPAH can do:

  1. Long distance wireless camera system (pictured below)
  2. Distributed air quality sensor system
  3. Remote solar field monitor network
  4. Long range airborne drone link
  5. Wide area soil moisture & plant health reporting network
  6. RS-485 wireless communications drop-in replacement for copper wiring
  7. Ad hoc emergency communications platform
Arducam HD camera attached to the SPI & I2C buses with +5V power

Host several hundred connections simultaneously

The maximum number of clients in traditional 2.4 GHz Wi-Fi is on the order of a dozen or so simultaneously active devices. Above this number the limited RF channel space and medium access contention issues drop available bandwidth dramatically. Wi-Fi 6 pushes this limit to several dozen devices via its expanded channel space in the 5 Ghz and 6 GHz Wi-Fi bands. But even a few dozen clients is often too few for sensor networks and distributed control systems.

The 802.11ah Wi-Fi protocol has been designed to support large numbers of clients. Our partners at Newracom, makers of the nrc7292 802.11ah chip used on the TD-XPAH, have tested well over 370 simultaneously connected clients to a single access point transferring and displaying bitmap images simultaneously.

Additionally, the 802.11ah protocol has introduced the concept of grouping client access into windows. These windows reduce contention of the available bandwidth by spreading client access across the time domain. This restricted access window (RAW) will allow up to several hundred simultaneous clients connected to each access point. To date only the 802.11ah protocol supports RAW mode. Here is a demonstration of Newracom showcasing these capabilities.

Halo TD-XPAH supports true 802.11s mesh networking

Mesh networking is a hot topic for both Wi-Fi and IoT in general. There is some debate as to what constitutes a "true" mesh network, but the gist of the idea is that devices can send data to their neighbors who in turn forward it toward its final destination. This extends the range of mesh networks to multiple hops from a gateway device such as a Wi-Fi access point.

Wi-Fi’s mesh protocol, dubbed 802.11s, became part of the Wi-Fi specification in 2011. It is a "true" mesh network in the sense that it includes a dynamic routing protocol at the mesh level. This means that nodes can come and go as they please and the protocol dynamically re-routes as the network topology changes. This is in contrast to simpler mesh protocols where the network is fixed and a disruption of the topology, such as the failure of a single node, disrupts the network itself. The TD-XPAH platform fully supports 802.11s mesh networks.

Operate with any Wi-Fi mode

Most Wi-Fi hardware products function as either a Wi-Fi client or a Wi-Fi access point. A few offer both features, but these hybrid client/AP platforms usually need to be attached an external system. During the TD-XPAH design phase we made sure that both Wi-Fi client mode and Wi-Fi access point mode are supported. We worked with Newracom, the creators of the 802.11ah chip used in the product, to add driver support to the Linux kernel so that the TD-XPAH can be used as a Linux 802.11ah client or AP over the USB bus.

But why stop there? What about using the TD-XPAH as a standalone product? To solve this, we included support for the FreeRTOS based SDK and standalone mode. The two modes, standalone or USB dongle, are configured via a set of on-board DIP switches. And both modes, standalone or USB, support running as both a Wi-Fi client and a Wi-Fi access point. And, yes, both modes support 802.11s mesh networking as well. We designed the TD-XPAH to be used in any Wi-Fi mode, with or without an external system, configured via on-board switches with mesh networking to boot.

Demo of the TD-XPAH as a USB Wi-Fi Dongle

Utilize hATs to connect with traditional networks

IEEE 802.11ah uses a new set of sub-1 gigahertz frequencies that are incompatible with traditional 2.4 GHz Wi-Fi and Wi-Fi 6. This means that, although 802.11ah is a Wi-Fi protocol and compatible with standard TCP/IP networks, 802.11ah is not available on current devices such as smartphones, tablets or PC’s. While the TD-XPAH can be used as a USB Wi-Fi dongle attached to an external Linux system, such as a PC or Raspberry Pi, attaching to existing networks is complex and requires expert network knowledge.

We are offering a 2.4 Ghz Wi-Fi Gateway hAT and an Ethernet hAT as solutions to attach to common networks and also as examples of how to build TD-XPAH hAT accessory boards. By adding either of these hAT’s to your TD-XPAH device you can connect to traditional networks over either 2.4 GHz standard Wi-Fi or over a standard Ethernet connection.

We also offer an Environmental Sensor hAT that provides remote feedback on air temperature, humidity, carbon dioxide (CO2) levels, and volatile organic compounds (VOC) levels.

Features & Specifications


Lora NB-IoT Sigfox Zigbee Bluetooth 5 GHz Wi-Fi 2.4 GHz Wi-Fi 802.11ah
Signal Range Very High Very High Very High Medium Low Low Medium High
Power Consumption Low Low Low Low Very Low Medium Medium Low
Recurring Fees No Yes No No No No No No
TCP/IP No Yes No Yes² Yes³ Yes Yes Yes
Throughput in Mbps Very Low Low Very Low Low Low Very High Very High High
Dynamic Network Topology Yes Yes No No Yes Yes Yes Yes
Client Connectivity Very High Very High High Medium Medium Medium Low Very High
Proprietary Protocol Yes Yes Yes No No No No No
Mesh Capable No No No Yes Yes Yes Yes Yes
Security Low High Low Low Low High High Very High
Cost Low Low Low Low Low Medium Medium Medium¹

¹ Cost is rapidly decelerating
² Via 6LowPan
³ Limited or no BT network support in many devices
Fixed mesh with a single active gateway

Support & Documentation


The FCC ISM unlicensed spectrum for IEEE 802.11ah Wi-Fi is 902 - 928 MHz. We currently only support these frequencies. The EU allocates 860 - 868 MHz for 802.11ah. Because it is subject by CE restrictions, the Halo TD-XPAH cannot be shipped to EU countries, the UK, Norway, Iceland, or Liechtenstein.

In the Press

Geeky Gadgets

"The Wi-Fi development platform can be used for a wide variety of different applications "

Design + Reuse logo

Design + Reuse

"[Halo] is the world’s first open source, open hardware Wi-Fi HaLow-enabled development platform aimed at engineers, creators and experimenters"

CNX Software

"While WiFi HaLow is another LPWAN standard, the higher bitrate enables different applications than LoRaWAN," logo
IoT for All logo

Ask a Question

Produced by Teledatics Incorporated in Westford, MA, USA.

Sold and shipped by Crowd Supply.

Halo TD-XPAH Development Board

802.11ah development board with antenna and pigtail connector

$109 $8 US Shipping / $18 Worldwide

TD-XPAH Wi-Fi Gateway hAT

2.4GHz Wi-Fi accessory board for the TD-XPAH

$52 $8 US Shipping / $18 Worldwide

Halo TD-XPAH Ethernet hAT

Ethernet accessory board for the TD-XPAH

$49 $8 US Shipping / $18 Worldwide

TD-XPAH Air Quality Sensor hAT

Sensor accessory board with I2C temperature, humidity, & air quality sensors for the TD-XPAH

$29 $8 US Shipping / $18 Worldwide

About the Team

Teledatics Incorporated

Westford, MA, USA  ·   teledatics  ·

Igniting the Future with AI-Driven, Long-Range Connectivity Unleashing AI at the Network Edge

Dan Slater
John Adams
Justin Carrel

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects