StereoPi

by virt2real

An open source stereoscopic camera based on Raspberry Pi

View all updates Oct 22, 2019

Field Report Grand Prix Contest Winners!

The Finalists

We are excited to present these three cool projects:

Minimalist case from mounting plate

This nifty case project was done by user Taki(Germany). You can see all the details in their field report.

Archaeological Survey Drone

This drone project from ZSEM university and the Coggnix startup was submitted by user Boris D (Croatia). Read the full report.

Stereomaton

This extensive project was submitted by JackDesBwa (France), and includes three field reports:

Prizes!

All of the finalists will receive a StereoPi Deluxe Kit...

...and also a couple of very special cameras for the StereoPi: two V2 pinhole fisheye cameras from Soho Enterprise. These tiny modules gives you a 187 degree FOV, so you can do experiments with 360 panoramic photos or 180 degree interactive panoramas (like this one from a StereoPi user on our forum).

And for our first place winner we will add two V2 cameras from the Raspberry Pi Foundation:

The Winners

  • 3rd place: Minimalist case from mounting plate from Taki
  • 2nd place: Archaeological Survey Drone from Boris D
  • 1st place: Stereomaton by JackDesBwa

Congratulations all!

We’ll be contacting our winners soon for prize delivery.

What was your experience with StereoPi? We welcome your feedback! Send us a Tweet, write us an email, or post it on our forum.


$102,644 raised

of $35,000 goal

293% Funded! Order Below

Product Choices

$69

StereoPi Slim Edition

Perfect for DIY ninjas and those wanting to embed StereoPi in a tight space. This board is the same as the standard edition, but without all the bulky connectors - the Ethernet RJ45 jack, GPIO header, and dual USB Type-A connector have not been populated. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables already included.


$89

StereoPi Standard Edition

The world of stereoscopic video awaits! This board is the ultimate interface between two cameras and a Raspberry Pi Compute Module. It comes with all the bells and whistles, including Ethernet, dual USB ports, GPIO header, microSD slot, HDMI output, and more. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables already included.


$125

StereoPi Starter Kit

This kit has everything you need to get started right away. The kit includes one StereoPi Standard Edition board, two V1 cameras (w/ ~20 cm ribbon cables), one Raspberry Pi Compute Module 3 + Lite, and everything in the StereoPi Accessories Kit (two short ribbon cables, one USB power cable, two power cables, one V1/V2 dual-camera mounting plate, and one wide-angle dual-camera mounting plate). We've also included a microSD card pre-imaged with Raspbian and all the stereoscopic video and image demos you see on this project page.


$199

StereoPi Deluxe Kit

This kit includes everything in the StereoPi Starter Kit and adds two wide-angle (160°) cameras (w/ ~20 cm ribbon cables). With this kit, you'll be able to run all of the demos shown on this project page and start experimenting on your own. You will reign supreme over your stereoscopic domain.

Credits

virt2real

We are a small team of geeks who have been making remote-controlled things with livestreaming video since 2010. We've done everything from boats and planes, to robots, copters, and VR helmets. If we can't find the right tools for our projects, we build them ourselves.


Eugene Pomazov

Sergey Serov

Kirill Shiryaev


NexPCB

Recommended

Full-service Manufacturer

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: