The ultimate low-cost massive MIMO SDR, with up to 32x32 transmit/receive channels
Combine LED strips to create a huge display that acts as a regular video monitor.
An ESP32 Wi-Fi/Bluetooth board that fits in a USB port
A complete solution for easy-to-use and affordable wired home automation
Compact, embedded x86 platform for SDR and other applications
A tiny, open source USB computer for security applications
Eight-core ARM64 Networking Platform with Mainline Linux Support
A tiny FIDO2 security key for two-factor authentication and passwordless login
A hardware-based USB 2.0 monitor & trigger platform, controlled from Python
A single-board computer in the Adafruit Feather form factor
A software-enabled, open-access small cell radio based on LimeSDR
An all-in-one encrypted USB flash drive, two-factor authentication token, and password manager
A 4G LTE and Wi-Fi connected Linux dev board with GNSS global positioning
A handheld RFID & NFC test instrument optimized for untethered use in the field
An open source, smart thermostat for controlling HVAC and water systems
Four-channel, all-frequency, GNSS RF-to-bits receiver for precision, satellite-based positioning
An STM32 LoRa® development platform that's software-compatible with Arm® Mbed™
An Artix-7 FPGA with its own DDR3 RAM right in your laptop - for developing PCIe, etc.
Control any stepper motor using Wi-Fi
An open, Bee-compatible ESP32 module for quickly and easily adding Wi-Fi and Bluetooth
Remote Development Device
An FPGA board that fits inside your USB port
The first open source iCE40 FPGA development board designed for teachers and students
An open-source, all-inclusive, combined device for monitoring and tracking
A 100% libre RISC-V + 3D GPU chip for mobile devices
A software-defined radio platform with integrated processor for creating self-contained wireless networks
Neural network accelerator for AI on the edge. Up to four trillion ops/sec with just a few watts.
The finger-tip sized ARM Cortex-M4F module with BT 5, BT Mesh, and 30 I/O
An ESP32-based board with wired Ethernet connectivity and power over Ethernet
BadUSB embedded into a USB cable
Multi-sensor data acquisition, processing, and Wi-Fi/Bluetooth communication in a single, open source board. Sense anything.
ANAVI Play pHAT is a super simple, low cost open source hardware add-on board for Raspberry Pi with buttons for retro gaming and slots for up to 3 I2C sensor modules.
The Re:Load Pro is an active load. It acts as a current sink, always drawing the same amount of current regardless of the voltage across it.
Open Source DIY Laptop for Hacking, Customization, and Privacy
A high-performance SDR seamlessly integrated with state-of-the-art deep learning hardware