SenseTemp

by Capable Robot Components

An accurate and flexible four-channel temperature sensor for instrumenting electronics

Feb 11, 2019

SenseTemp TEC Thermal Chamber

First, thanks to everyone who's purchased a SenseTemp or SenseTemp TEC! This campaign is a few days from over, and the final update before the campaign closes is a rather large one. Read the full update.


Jan 29, 2019

SenseTemp Accuracy Testing

I'm excited to show you all an example of SenseTemp TEC running a small thermal chamber, but you'll have to wait until later this week for that update. In the meantime, I've been doing some accuracy measurements on SenseTemp and have some experimental results to share. Read the full update.


Jan 23, 2019

SenseTemp IoT Demonstration & DIY RTD Harness Information

Are you curious to see some live SenseTemp data? Well, this is the update for you! We've got sample code showing how to push data directly from SenseTemp to an MQTT broker, live SenseTemp data from New Hampshire, and also instructions on how to make your own RTD Harness for SenseTemp. Read the full update.


Jan 14, 2019

SenseTemp is Now Live

I'm excited to be launching SenseTemp here on Crowd Supply today! Read the full update.


$2,040 raised

of $100 goal

2,040% Funded! Order Below

Product Choices

$75

SenseTemp

Get your own SenseTemp board, fully assembled and tested. Does not include Adafruit Feather or RTD sensor harness.


$175

SenseTemp Starter Kit

Everything you need to dive into the world of accurate temperature measurement. This kit includes the SenseTemp board, your choice of Feather host (pre-programmed with Python firmware), interconnect headers, and an assembled and tested RTD sensor harness.


$175

SenseTemp TEC

Don't settle for measurement alone - start controlling temperature! Get your own SenseTemp TEC board, fully assembled and tested. This board has all the functionality of the SenseTemp board, with the added ability to control a thermo-electric cooler (TEC, a.k.a. Peltier junction) and drive other devices such as a fan. Does not include Adafruit Feather, RTD sensor harness, or thermo-electric cooler.


$275

SenseTemp TEC Kit

This kit includes the SenseTemp TEC board, your choice of Feather host (pre-programmed with Python firmware), interconnect headers, two-pin power harness, four-pin TEC/fan harness, and an assembled and tested RTD sensor harness. Thermo-electric cooler not included.


$75

RTD Sensor Harness

This cable harness has a single 16-pin IDC header that splits into four strands, each with a four-wire cable terminated in a platinum resistive temperature detector (RTD) element. The ribbon cable is 30 AWG, 0.025” pitch, and has silicone insulation. The harness is compatible with both SenseTemp and SenseTemp TEC.


$50

Thermo-electric Cooler (TEC) Module

This 12 V / 5 A thermo-electric cooler module (a.k.a. Peltier junction) is the perfect companion for the SenseTemp TEC and SenseTemp TEC Kit. The module includes a heatsink and fan. When ordered with the SenseTemp TEC Kit, the kit's TEC/fan harness will be soldered and heat-shunk to the TEC and fan leads, making it plug-and-play with SenseTemp TEC.

Credits

Capable Robot Components

Capable Robot Components enables rapid development of autonomous robots by providing technological building blocks to system integrators. Right now, integrators have to develop things they would rather purchase because the right robot-first products don't currently exist. CRC provides proven products which are domain-agnostic, but configurable and adaptable to the integrator's market needs. This allows autonomous system developers to spend more time and effort on domain-specific engineering and testing.


Chris Osterwood

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: