Results for 'anavi'

All ANAVI Gas Detector kits include a MQ-135 analog gas sensor module for detecting air quality. According to the data sheet of MQ-135, the sensitivity characteristics of the sensor depend on temperature and humidity. Because of this, the Advanced and Developer kits of ANAVI Gas Detector also include a HTU21D I2C temperature and humidity sensor module. For everyone's convenience, the default Arduino sketch for ANAVI Gas Detector supports both Celsius and Fahrenheit.

Learn how to use ANAVI Handle to turn your old laptop into a portable retro-gaming powerhouse.

We are adding three new members to our family of miniature, open-hardware input devices. Based on your feedback, they all feature USB Type-C connectors. Another major improvement is the inclusion of a mighty Raspberry Pi RP2040 microcontroller, which is significantly faster than the Microchip ATtiny85 that we used in ANAVI Macro Pad 2.

We are adding three new members to our family of miniature, open-hardware input devices. Based on your feedback, they all feature USB Type-C connectors.

The ANAVI Light pHAT campaign is now live.

In this guide, you will learn how to use Esptool to flash a precompiled binary version of this default firmware onto the ANAVI Miracle Emitter.

Learn more about the microcontroller at the heart of the Anavi Dev Mic.

Check out the ANAVI Thermometer user manual on Github!

Thank you for supporting the open source project ANAVI Infrared pHAT! Thanks to your generous contributions the crowdfunding campaign raised more than 2000 USD in less than two weeks. In the mean time ANAVI Infrared pHAT user's manual was updated and now works with the latest release of Raspbian.

Here are a bunch of helpful resources to help you get started with your ANAVI Handle.

The last couple of weeks were super exciting for the Raspberry Pi community. Here is what that means for ANAVI Infrared pHAT users.

After a lot of hard work, I am happy to announce the bigger brother of Light pHAT.

Thanks to Microchip ATmega32U4, ANAVI Macro Pad 8 connects to the USB of your personal computer, drives the mini OLED display through I2C and has more than enough general-purpose input/output (GPIO) pins for the mechanical switches. Learn all about it in this update!

The ANAVI Infrared pHAT is now fully compatible with Raspbian Stretch.

The TPM 2.0 is a certified open-source hardware add-on board designed for all Raspberry Pi single-board computers. It is built around the [OPTIGA TPM SLB9672 from Infineon Technologies, which provides a robust hardware-based root of trust.

We're shipping ahead of schedule! Please make sure your shipping address is correct and up-to-date.

The first batch of 60 units ANAVI Infrared pHAT is ready. The shipping started today, more than 2 weeks ahead of schedule.

The Info uHAT went to a conference!

We have received official confirmation that ANAVI Gardening uHAT is certified as open source hardware by the Open Source Hardware Association!

The manufacturing of ANAVI Infrared pHAT has started. The local factory in my hometown Plovdiv, Bulgaria has already made the printed circuit boards. Now comes the most time consuming task - the hand soldering of the components.