Results for ',sET'


The Best Chess Set Ever!

Fold Project
Project · A Fold Up Eating Set
2.370
A product family that's stronger, lighter and 20 times smaller than any other? Here's the story.

The Best Chess Set Ever just got better.

3.5 pallets of Slimes! First of many big shipments!
The day has finally come, the first large shipment of Slimes has left our Cave (it actually happened a few days before this update, sorry for the delays)! They are now on their way to Crowd Supply's distribution warehouse, and from there they will be shipped to you!

Article · Setting Funding Goals
1.160

Project Update · Play with LoRa modem settings
1.120
In this update, we'll explore a recent test we performed while trying to find the optimum modem settings for the ratio: battery life vs. time in the air and distance. We tested different combinations of SF, CR and Bandwidth.

Setting your campaign's funding goal is one of the biggest decisions you will make before your campaign launches. Luckily, there's exactly one correct way to set your goal: ask for what you need.

KrakenSDR enclosure update
In this update, we'll provide an update on the progress of KrakenSDR that occurred throughout February.

In this update, we discuss low battery alerts and how to set them up with the help of the WiCAN device.

IQ Motor Module
Project Update · Propeller Settings
1.040
How do I use closed-loop (Velocity Mode) with a propeller that isn't listed in the IQ Control Center? We've gotten this question from several backers, so we wanted to give you a thorough answer!

PMOD Set
Project Update · Introducing the ULX3S PMOD Set!
1.030
Now that we are in the final third of our campaign, we would like to offer up a few PMOD expansion boards for ULX3S so you can enjoy this FPGA board even more! The ULX3S PMOD Set includes three PMODs: a dual-USB board, a digital video board, and an OV7670 camera connector. Read on for more details!

Wee Noise Makers PGB-1
Project Update · Demo Video: Track setting on PGB-1
1.010
This week, we have campaign news and a new instructional video.

We recently published a Transmitter Power Settings Guide for Wi-Fi communication using ESP32-M1 Reach Out. It explains the power table, related code, and the steps required to increase or decrease transmitter power using the RFFE. It also covers bypass mode and provides measurements.

HealthyPi 4 user Phillippe put the device through its paces in his research clinic. Find out how it performed in this demanding setting.

CANFDuino
Below is a how-to video that goes through the process required to set up a low-cost, two-channel sniffer using CANFDuino and the SavvyCAN open-source CAN sniffing software.

After ordering a slough of parts, including one of the obscurely-named On-the-Go Host-Charger cables which we finally found, we've been able to test and verify the two cables needed to turn any Computer Card into a standalone computer, without the need of either of the Micro Desktop or Laptop housings. We've added it as a pledge level to the campaign

Project · SlimeVR Full-Body Tracker
0.820
An affordable, comfortable, wireless, 360° solution for full-body tracking in virtual reality

Porcelain dishware settings with photorealistic prints of iconic messes and spills.

Project · SlimeVR Butterfly Trackers
0.630
Super comfortable IMU body-tracking for virtual reality, motion capture, and VTubing

Project · UsbSafe²
0.330
An open, programmable dongle for protecting USB devices from USB hosts and chargers.
Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects