You are are invited to the Ask Me Anything (AMA) session on our open source hardware products in the Crowd Supply Discord. The chat starts at Wednesday, September 23th 2020 at 1PM Pacific and will go for about an hour. Read the full update.
Backer Morten M put together a system that allows him to control a remote HVAC system using Home Assistant and the Anavi Infrared pHAT. For details, check out the full update. Read the full update.
Learn how user Michel T. used the Anavi Infrared pHAT to unify all the remotes in his household to a single tablet/smartphone interface. Read the full update.
Bring older A/V equipment into the IoT age with Anavi Infrared pHAT. Read the full update to find out how one backer did it. Read the full update.
Backer Eric O. used the Anavi Infrared pHAT to build a voice operated home assistant that works with his assistive technology and his TV. Read the full update to find out how he did it. Read the full update.
Did you make something amazing with your Anavi gear? Let us know by submitting a Field Report and you can get a Crowd Supply credit and win prizes! Read the full update to find out how. Read the full update.
The last couple of weeks were super exciting for the Raspberry Pi community. Here is what that means for ANAVI Infrared pHAT users. Read the full update.
A few months ago the Open Source Hardware Association certified ANAVI Infrared pHAT Read the full update.
Another batch is in production at the local factory in Plovdiv, Bulgaria. Read the full update.
Thank you for supporting the open source project ANAVI Infrared pHAT in 2017. It was an adventurous year. Thank you for being part of it! Read the full update.
Last week the last batch with Infrared pHATs for 2017 was delivered from the local factory in Plovdiv, Bulgaria. Now I am testing and preparing the boards for shipping. All pre-orders for ANAVI Infrared pHAT (for 16 USD) will be shipped on 28th and 29th December via registered airmail service of the Bulgarian posts. Read the full update.
All orders for ANAVI Infrared pHAT placed during the crowdfunding period were shipped ahead of schedule, by 1 December. Immediately after that the shipping of the pre-orders started. Most of you have already received tracking numbers via email. Read the full update.
Couple of weeks ago we received the second batch of boards from the factory. Read the full update.
The first batch of 60 units ANAVI Infrared pHAT is ready. The shipping started today, more than 2 weeks ahead of schedule. Read the full update.
Earlier this month, the ANAVI Infrared pHAT crowdfunding campaign ended very successfully. Thank you very much for the support! Read the full update.
Just a few days left until the end of our crowdfunding campaign for ANAVI Infrared pHAT. We have raised more than 3000 USD and the manufacturing has already started. Read the full update.
The manufacturing of ANAVI Infrared pHAT has started. The local factory in my hometown Plovdiv, Bulgaria has already made the printed circuit boards. Now comes the most time consuming task - the hand soldering of the components. Read the full update.
Thank you for supporting the open source project ANAVI Infrared pHAT! Thanks to your generous contributions the crowdfunding campaign raised more than 2000 USD in less than two weeks. In the mean time ANAVI Infrared pHAT user's manual was updated and now works with the latest release of Raspbian. Read the full update.
The ANAVI Infrared pHAT campaign is now live on Crowd Supply. Transform your Raspberry Pi into a smart remote control and start bringing your old consumer electronic devices back to life. Read the full update.
Make your lights open source and connect your LED strip to the WiFi network with ANAVI Light Controller!
ANAVI Play pHAT is a super simple, low cost open source hardware add-on board for Raspberry Pi with buttons for retro gaming and slots for up to 3 I2C sensor modules.
Make your Raspberry Pi bright and shiny with an RGB LED strip and ANAVI Light pHAT!