by Starcat

8-32 channel TI ADS1299 Arduino shield for EEG, EMG, and EKG bio-signals acquisition

Jul 30, 2021

Jupiter Nano - A tiny, high-performance computer designed for biosignals acquisition

I have a new project launching on Crowd Supply, and I thought people who are interested in HackEEG might want to take a look. Jupiter Nano is a small, high-performance computer that runs Linux or the NuttX Real Time Operating System (RTOS). It is designed to get lots of biosignals data from sensors and peripherals into its own SD Card storage or onto a host computer at high speed. It's not specifically made for HackEEG, but if you're looking for a portable computer that can talk to HackEEG or similar devices, Jupiter Nano is a good candidate. Read the full update.

Jun 10, 2020

HackEEG Instructions and Documentation

Here's the instructions for getting the HackEEG hardware and software running Read the full update.

Apr 28, 2020

Electronics Have Arrived

I just want to let you know we've received all the HackEEG electronics, electrodes, and connectors necessary to fulfill all orders Read the full update.

Feb 22, 2020

Electronics Manufacturing Orders Placed

Orders have been placed for electronics manufacturing for the HackEEG and Connector-8 boards. HackEEG boards are slated to be here on 10 April. Read the full update.

Jan 31, 2020

Manufacturing Preparation

A big thank you to everyone who backed the campaign! I just want to let everyone know what's happening right now. Read the full update.

Jan 23, 2020

HackEEG 32 Channels Displaying in OpenBCI

This post shows a HackEEG 32 channel system sending data to OpenBCI. Read the full update.

Jan 22, 2020

16,000 Samples Per Second on a Raspberry Pi 4

In this update, I’ll show you how to stream 16,000 samples per second on a Raspberry Pi 4. Read the full update.

Jan 21, 2020

HackEEG Is Fully Funded!

Thanks to everyone who’s contributed so far, HackEEG is now fully funded! Read the full update.

Jan 21, 2020

Four Boards, 32 EEG Channels

I've been wanting to show this off for a long time, and I finally got the software working! Read the full update.

Jan 14, 2020

HackEEG Driver Protocols and Software Repositories

Here's a couple of quick updates today... I'll have a more substantive update later in the week. Read the full update.

Dec 30, 2019

8 EEG Channels at 16,000 Samples Per Second!

One of HackEEG's super-powers is speed. Because it has a wired USB connection to a host computer like a laptop or a Raspberry Pi, it can read and transfer data much faster than many other EEG devices. Read the full update.

Dec 20, 2019

Streaming HackEEG data via Raspberry Pi

You can stream HackEEG data wirelessly via Wifi using a Raspberry Pi 4. This update will go over how to do that. Read the full update.

Dec 18, 2019

Funding Goal Reduction

Hey everyone, with Crowd Supply's help, I took a closer look at the minimum order quantities for my manufacturer. I found out I could reduce the minimum order quantity a lot. That makes it a lot easier to reach the campaign goal and get you your equipment. So here's what's happening: Read the full update.

Dec 16, 2019

HackEEG and OpenBCI

HackEEG is designed to read your brainwaves (EEG). So how do you do that? Read the full update.

Dec 12, 2019

HackEEG is Live

The HackEEG campaign is now live and funding! Read the full update.

$26,075 raised

of $8,455 goal

308% Funded! Order Below

Product Choices


HackEEG 8-Channel Basic Kit

Includes one HackEEG, a ribbon cable, and an electrode connector.


HackEEG 8-channel Starter Kit

Includes one HackEEG board, a ribbon cable, and a connector board with ten DIN 42-802 touch-proof electrode connectors (eight inputs, one reference, one ground).


HackEEG 8-channel Deluxe Kit

Includes one HackEEG, a ribbon cable, an electrode connector, Arduino Due, ten silver chloride EEG electrodes, two ounces of Ten20 conductive paste, and four ounces of NuPrep prep gel.


HackEEG 32-channel Deluxe Kit

Includes 4 x HackEEG, 4 x ribbon cable, 4 x electrode connector, 1 x Arduino Due, 40 x silver chloride EEG electrode, 4 x two ounces Ten20 conductive paste, 4 x four ounces NuPrep prep gel.



Electronics R&D company specializing in open source hardware and high performance biosignals acquisition equipment; creator of the HackEEG shield successfully launched on Crowd Supply in 2020

Adam Feuer


PCB Fabrication & Assembly

Plastics One Technologies

Components Manufacturing

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: