by plugg.ee Labs

An open source, modular, robotic control system for building 3D printers, CNC routers, and other robotics applications

Jul 06, 2017

Support Forum is Online

Hello Everybody, we have a quick update this week. Read the full update.

Jun 28, 2017

Delivery Expectations

Hey Everybody, I apologize for the delay in updates but we were extremely busy during the past few weeks. We're glad to announce that all boards have been tested and are now on their way to Crowd Supply for fulfillment. Read the full update.

May 31, 2017

70% of the Finished Boards Received

We're happy to announce that we've received 70% of the finished boards and we're currently sorting and testing them. We've received all boards except R1001 and R1000AX. Read the full update.

May 17, 2017

Production Update and Interposer Board Survey

Hello Everybody, we have a few items to update you on this week. Read the full update.

May 01, 2017

R1000AX and R1001 are Off to Production

Thanks For Making It Happen! I know that's a little late (we were very busy bringing up R1008), but thank you all very much for supporting JuicyBoard. We got a lot of constructive feedback that added positive features and modifications to the design. Read the full update.

Apr 14, 2017

Campaign Ending Soon and Other News

Hello everybody. There are a couple of updates this week, but first I want to thank everyone who has supported the campaign thus far. We have a few days left in the campaign, so please help spread the word and support JuicyBoard over the campaign's final days. We couldn't do this without you! Read the full update.

Apr 07, 2017

R1000AX Compute Module Modification

Hi Everybody, we've got a few exciting updates this week: Read the full update.

Mar 31, 2017

Short Survey

Hello Everyone! After completing the last R1000AX JuicyBoard PCB design last weekend we got some interesting feedback. At the moment the R1000AX board includes a micro-SD and a full SD card receptacle, both are using the same SPI port (so they can't be used simultaneously). The full size SD is there as a convenience for some who prefer to use it. Read the full update.

Mar 24, 2017

Thank You and More

Thank you everybody! We were able to achieve our goal within the first couple of days. It was an exciting week and we'd like to share with you a few updates: Read the full update.

$10,552 raised

of $1,000 goal

1,055% Funded! Order Below

Product Choices


Builder Kit

A complete kit that can build almost any complex 3D printer, CNC or router. Includes: R1000AX board (1); R1001 Stepper Motor Drivers (8); R1002 Quad 1A DC Low Side NFETs module (1); R1003 Analog/Digital I/O modules (2); R1007 Quad 20A DC Low Side NFETs modules (2); R1008 Dual Channel Platinum RTD PT100 Temperature Sensor modules (2).


JuicyBoard R1000AX

This is the JuicyBoard with all bells and whistles! 15 feature slots + SD card slots + all the reliability and safety features.


R1001 Smart Stepper Motor Driver

Smart stepper motor driver module with independent current control, stepping resolution, and telemetry functions.


R1002 Quad 1A DC Low Side NFETs

Quad switches for controlling low-power peripherals, such as large LED status displays and fans. Maximum current limit of 1 A per channel.


R1003 Analog/Digital I/Os

This module provides a quad channel analog or digital interface to the main CPU. It includes a 1% 4.7 kΩ resistor as required in most thermistor setups. Can be used for analog inputs, digital inputs, or outputs.


R1007 Quad 20A DC Low Side NFETs

Four super-low resistance NFETs that can be used to drive very large peripherals (like a large heater or DC spindle). The transistors are rated 100 A (with less than 2 mΩ series resistance). Includes the necessary R1005 extender module.


R1008 Dual-Channel Platinum RTD PT100 Temperature Sensors

This module uses two Maxim MAX31865 RTD-to-digital converters for precision temperature measurement. Hook up two PT100 resistors appropriate for your application (not included) for temperature readings accurate below +/- 0.3 C. Can be configured to sense 2-wire, 3-wire, and 4-wire PT100 configurations.


plugg.ee Labs

I love to design and make cool gadgets, I previously made the WiFi controlled smart plug.

Sherif Eid

See Also

Subscribe to the Crowd Supply newsletter, highlighting the latest creators and projects: