Results for ',sET'

Wow! In just a few days we've reached over 40% of our funding goal! We're off to a great start, thank you all so much!

We are excited to announce the introduction of two new color options for Aeroh Link. Since most home appliances are either black or white, we decided to offer those two colors, in addition to the original yellow. You can now order your Black or White Aeroh Link on our campaign page!

After many months of community feedback, testing and tweaking, we’re finally ready to release the Colorado Printing Project’s second product, the Microcluster!

Beach & Pool Water Caddy and Smart Phone Cradle

It’s a handle! It’s a stand! Gerp is a universal grip for tablets, mobile devices & more. Gerp gets a grip on your gadgets!

We’re super excited to announce that we have been fully funded! We have managed to raise over 2000 US dollars in just 17 days and we could not have done it all without you! So what does that mean now? The Eating Set will now be available for pre-order through Crowd Supply and making its way to your doorstep within the next 6 weeks! Pre-orders will still be available after the campaign if you ...

Revitalizing BBQ sauces that made people in Portland smile for over 20 years

The NeTV2 production pipeline is really starting to take shape. In about one week I will be heading to South Korea to bring up a new line for NeTV2 production. Although I had originally intended to do production in Dongguan, China, those plans were a quick casualty of the trade war between the US and China.

As ChipWhisperer-Husky gets close to entering the end of the campaign, we wanted to share some of the new features you'll get to enjoy. Our final update during the campaign next week will include a sneak peek at how we test units as we prepare for production. But in the mean-time, we wanted to recap what makes the ChipWhisperer-Husky so much more exciting than the previous ChipWhisperer-Lite!

To be able to use your Tarocco board, you need to make sure that:

Hello Backers, Thank you all for your patience during these last couple weeks. I know a lot of you have not received your orders yet, and this update will explain why.

Exquisite printed circuit boards that bring to life Forrest Mims' vintage designs from "Getting Started in Electronics."

A low-power, easy-to-program, open-hardware e-paper display with Wi-Fi support and a 9.7" screen

Since the MicroPython Inkplate library was originally a GitHub contribution to us from "tve", we've decided to port it to other Inkplate models and Inkplate 13SPECTRA is no different!

For my first weekly update, I have prepared a pinout diagram to help clarify how NeuroStimDuino connects to an Arduino MEGA or Due. This update also introduces the I²C library that you will use to configure and control the stimulator.

Hello again NeuroStim Enthusiasts! Now that you already have or are about to receive your own NeuroStimDuino, we have put together a getting started tutorial for you all. This tutorial will take you through the basic steps of setting up the hardware and software for configuring NeuroStimDuino.

Hey folks! Our campaign ended yesterday, and we exceeded our funding goal by a significant margin. We are deeply grateful to Crowd Supply and to all of our backers for making this campaign a great success. Thank you!! This update also demonstrates how you can control two or more NeuroStimDuinos using a single I²C bus.

Let's start this update with some good news: We've received the funds from the campaign and manufacturing is in full swing.

Hi everyone! As you have likely noticed, things often don't go as planned. In our previous update, as well as an update before this, we planned that new review sets would be shipped to reviewers and developers in April, and first batch would be shipped to backers somewhere mid-summer. It's end of July and none of this has happened yet; so let's break down why, what has been done, and what are the next steps in fulfilling the SlimeVR campaign.

Take control of your home as never before.