Results for ',sET'

Since the MicroPython Inkplate library was originally a GitHub contribution to us from "tve", we've decided to port it to other Inkplate models and Inkplate 13SPECTRA is no different!

Pre-production prototypes of the Microdesktop and EOMA68-A20 boards were initiated last month, samples were completed last week and tested. Short version: another pre-production run is needed.

A low-power, easy-to-program, open-hardware e-paper display with Wi-Fi support and a 9.7" screen

The pre-production EOMA68-A20 HDMI Revision 2.7.5 review is nearly complete and the capacitors replaced; Thank you to everyone who's helped with funding.

Ultra-reflective urban-oriented bike tires.

A power regulator is inexplicably not working, so we'll need to replace it. We'll get there, one step at a time.

Thank you for your patience while we continue to manufacture and ship LimeSDR, LimeSDR Mini, and related products. We are experiencing a modest delay in fulfilling all outstanding orders while we ramp up higher-volume manufacturing and transfer inventory management fully over to Crowd Supply.

Hi everyone! As you have likely noticed, things often don't go as planned. In our previous update, as well as an update before this, we planned that new review sets would be shipped to reviewers and developers in April, and first batch would be shipped to backers somewhere mid-summer. It's end of July and none of this has happened yet; so let's break down why, what has been done, and what are the next steps in fulfilling the SlimeVR campaign.

After more delay than we'd like (sorry!), we are finally shipping! Plus, be careful not to blow up your Ethernet Phy!

The EOMA68 project has a lot of 3D printing to do! This update describes some of the challenges, progress, and alternate approaches.

During the weekend I have published a short video tutorial in YouTube how to compile and upload an Arduino sketch to it through Arduino IDE.

So, finally, the HDMI Review is complete: the Gerber files have been sent to the factory for PCB manufacturing. Estimates can now be made (between five to seven months) until shipping. There's been a great response from people with donations and sponsorship.

Hurray, we reached our funding goal! Also, the campaign is almost over! Time flies when you're having fun I guess. Time also flies when you're very busy. :) In this update I wanted to talk about the test fixture used to test each unit before it gets shipped to you.

We're already funded and the last components for the December scheduled batch have arrived.

It's been only couple weeks since the last update, but we're back and with amazing news: DIY Kits are shipping!

The world's first ATX-compatible, workstation-class mainboard for the IBM POWER8 processor.

Learn how backer Karl S. used Anavi Thermometer in his home automation system to preserve domestic tranquility. Read the full Report to see how he did it.

We get asked a lot about why we aren't using RISC-V for Talos™. This update details our rationale and delves into the long history of POWER over the past several decades.

Last week, we focused on DFM considerations that went in to Tigard - this week we'll talk about testing - both the design consideration as well as the testing hardware and software.

Introducing our new “TB Squeeze Pack!” - At 1.15 oz and packed with all-natural energy and nutrition, these little guys are the epitome of healthy convenience on-the-go.