Results for ',sET'

Time has been flying since our previous post, but we are ready to share some really good news with you. In our last post, we mentioned some of the changes we planned to make on the Kryptor board. We are happy to say we have accomplished all of that and much more. Read on to see how the new improvements will benefit you.

This update includes a 3D render designed to give you a sense of what our translucent purple enclosures will look like. It also describes our Skeleton Auto-Configuration tool, which is part of the interactive setup process we are developing to help you get up and running as quickly and easily as possible.

Heyo! We wanted to make a quick update to let you know how the assembly is going. We're still didn't ship despite our hopes in the last update, mainly because new tester turned out a way bigger and challenging project than we anticipated. It's still not finished, though we think it will be in the next few days. That doesn't mean we're not busy, of course! While some in our team are working on the tester, others are continuously working on packing and assembly of accessories, boxes, and such things.

We believe that VR, like all technology, should be open and accessible. SlimeVR Full-Body Tracking is our first step toward that objective – toward a world in which VR is both more immersive and more affordable. SlimeVR trackers not only compete with more expensive alternatives, they surpass them in many ways: SlimeVR trackers can't be occluded, they're compatible with any PCVR setup (without requiring additional base stations), they can be used in a room of any size, and their batteries last for up to 15 hours of playtime.

This update includes a breakdown of what's been keeping us busy, lately, including an early, work-in-progress, proof-of-concept demo of possible, future support for standalone Oculus Quest applications. (How's that for a disclaimer?)

We have prepared a step-by-step tutorial to familiarize you with some simple but strong encryption procedures and to demonstrate how to connect the Kryptor HSM FPGA to a Raspberry Pi and exchange encrypted sensor data between two Raspberry Pi’s.

We very much appreciate the patience of everyone who’s been waiting for their brand new Inkplates! It has been a long summer with shortages, and it seems like our projection that we would need a lot of time to ship Inkplate 6COLOR was correct. We have some good news ahead, though.

Learn how to write a blinky program on Somu. And meet some of our friends!

We're funded and still going strong! Woohoo! A huge thank you again to all the backers that made this project come to life. Your attention and support has definitely gotten the attention of Pervasive Displays, the E-paper manufacturer I chose to supply the displays.

Thank you for your patience while we wound down from producing our Launch batch and started production of the Preorder batch. Everything went fantastically with the first batch, so we're anticipating an even tighter turnaround time for this batch.

While I'm still working on adding high-voltage flashing support to the latest firmware revision, I wanted to share how everyone can benefit from the open source nature of the ATtiny Flasher firmware. This update includes a description (and a video!) of the firmware-update process.

One of the reasons I created Loud-ESP was to bring new life to old, obsolete audio gear. Here's how I revived a vintage Unica Oscar 7015 radio.

What a big first week! (well, really 4 days, but who’s counting). We’re over a third of the way there, and it is all thanks to YOU! We still have a long way to go, so keep up the good work. If you have friends who haven’t heard about this project yet, let ‘em know! Don’t try and keep this exciting news to yourself; that’s just selfish. Share it with the world. We’ll even help you so you don’t ...

SnapShades Nation, It’s been a while. There has been a lot of change happening here at SnapShades HQ, so let me bring y’all up to speed: The good: We solved one major technical hurdle. The magnets naturally align themselves to a their central axis; however, the supplier was having issues setting the rim magnets parallel to the male/female mating face. They insisted they could fix this, and have...

Greetings SnapShades Nation, Hope y’all are all having an excellent summer. We told you as soon as we had news, you’d hear it, so here’s the good news. Our first off-tool samples are ready to go and have been shipped! As we speak the first complete set of SnapShades is somewhere over the Atlantic Ocean. Were excited to see our vision come to life, and we cant wait to share it with you! This i...

Enjoy instant relief from allergies and pollutants in your personal bubble of fresh, clean air.

Harold and I have been watching the progress of the Sprimo campaign very closely, as any founder would. This has been a very exciting as well as educational experience for us.

It gives me great pleasure to announce that crowdfunding for the LoMesh project has begun. In the age of IIoT and Industry 4.0, LoMesh is a valuable, robust, and affordable tool for moving data around.

May 3rd is here! A few weeks ago this campaign was still feeling pretty theoretical to me and I am still so amazed and grateful to each person who's backed her that the Circuit Classics campaign is off to such a phenomenal start.