Two fully programmable, open source, no-solder, hot-swappable mechanical keyboards powered by Raspberry Pi & CircuitPython
A quiet, open source, ESP32-based, Wi-Fi-enabled AC outlet relay with Home Assistant compatibility
A powerful ESP32-based IR/RF remote with sensors and easy integration into Home Assistant
A powerful, no-code, app-enabled Bluetooth data communication system based on the Nordic® nRF52832 SoC
A compact, open source ESP32-S3 PIR motion sensing board
Small, programmable, open source input devices with clickable rotary encoders
Open source, ESP32-C3 CAN adapter with USB, Wi-Fi, and BLE support
A fully open source ESP32-based PoE+ board with a mikroBUS™ socket and two handy add-on shields
Open source, battery powered, stand-off acoustic water leak detection
An open hardware Raspberry Pi add-on board with a mini OLED display, buttons, and slots for sensors
A hackable IR remote control with an OpenAPI and support for app and voice control
A low-power, open source, 2.7-inch IoT display powered by an ESP32-S2 module and featuring SHARP's Memory-in-Pixel (MiP) screen technology
Take control of your home as never before.
Open source smart gardening done easy, with Raspberry Pi
Versatile hub for all wired communication
A compact, easy-to-use, low-power, bidirectional, thermal-detection sensor that respects privacy
A tap-to-read NFC tag that logs temperature and humidity
Open source, programmable two-key mechanical keypad with backlighting
A versatile, easy-to-use, open source ARM development board
A stackable, DIN-rail mountable, solid-state power driver for Raspberry Pi and other SBC & MCU platforms
An open source, single board computer for smart home and industrial control
Open source, programmable, eight-key keypad with backlighting, underlighting, and OLED screen
A multi-function interface board for the Commodore 64
The open source smart solder smoke absorber
A complete solution for easy-to-use and affordable wired home automation
An ESP8266-powered, open source, Wi-Fi dev board to control two 5 V or two 12 V LED strips
An ESP8266-powered, open source, Wi-Fi dev board for monitoring air quality and detecting dangerous gases.
The long-range LoRa® wall switch powered by coin cells and the Arduino IDE
An open source, smart thermostat for controlling HVAC and water systems
ANAVI Play pHAT is a super simple, low cost open source hardware add-on board for Raspberry Pi with buttons for retro gaming and slots for up to 3 I2C sensor modules.
Make your lights open source and connect your LED strip to the WiFi network with ANAVI Light Controller!
Minimalist Wi-Fi Nixie Clock
Make your Raspberry Pi bright and shiny with an RGB LED strip and ANAVI Light pHAT!