Joined May 04, 2017. Backed 30 projects.
Open source USB LoRa® device. Get connected and take advantage of the growing IoT network.
An FPGA board that fits inside your USB port
An ESP32-based board with wired Ethernet connectivity and power over Ethernet
A utility knife that takes minimalism to a new vanishing point.
An open, Bee-compatible ESP32 module for quickly and easily adding Wi-Fi and Bluetooth
A USB hub with per-port power and data disconnects + dev board + I2C, GPIO, and SPI bridges
Open hardware USB true random number generator
Multi-sensor data acquisition, processing, and Wi-Fi/Bluetooth communication in a single, open source board. Sense anything.
An open source, Arduino-compatible RISC-V dev kit
A tiny, open source, plug-and-play Linux dev board with Wi-Fi and lots of storage
An ESP8266-powered, open source, Wi-Fi dev board with temperature and humidity sensors
The long-range LoRa® wall switch powered by coin cells and the Arduino IDE
BadUSB embedded into a USB cable
Bridging Arduino to breadboard with no jumper wires
A low-cost, thumb-sized, breadboard-friendly FPGA dev board for makers and hardware designers
A 4G LTE and Wi-Fi connected Linux dev board with GNSS global positioning
A low-cost, low-power NAS for 2.5" drives
Arduino-programmable & Internet-connectable LED Matrix Display
USB-Powered, Low Priced, Open Source RF Signal Generator
An easy-to-use tool for controlling I²C devices
An affordable, configurable, open source retouching module for professional and hobbyist photographers
A Portable Project Platform for Every Raspberry Pi Zero
An ARM board that fits inside your USB connector
Wi-Fi remote management module for PCs
The compact, open, and smart PCB reflow machine. Bake your dream!
An ESP32 in a Raspberry Pi Form Factor
A full-featured LiFePO4 battery, power manager, and UPS for the Raspberry Pi